Is there a Hitch for a 2024 Kia Niro EV?

Question

Question:

Is there a hitch for a 2024 Kia Niro EV?

asked by: Santiago

0

Expert Reply:

Yes, there is! To add a hitch to your 2024 Kia Niro EV, I recommend the Curt item # C77NR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.

If you are planning on towing you will also need a wiring harness item # 119250KIT and a ball mount kit item # C45534.

expert reply by: Jerred H

0

Answer 1

Hey Thom, thanks for the pictures. No, that's not right. This is a complicated install. I found a video for it on Torklift's Youtube page. To install the EcoHitch item #EH72KR on your 2022 Kia Niro PHEV, you'll only use the hole…

view full answer...

Answer 2

Hey Robert, the Curt hitch #C77NR is a confirmed fit for your 2024 HEV Kia Niro EX and would work great to tow your small trailer. For trailer wiring then you'd want the Curt kit part #C36ZV and you'd be set. Do you have a trike carrier…

view full answer...

Answer 3

Hey Jan, so we had a customer come back and tell us that they were able to install the Curt hitch #C77NR on their 2024 Kia Niro EV Wave and it worked well so it can for sure fit.

view full answer...

Answer 4

According to Curt, the time it would take an experienced mechanic to install the #C77NR is 25 minutes. It would take the average person about an hour. I have attached the installation instructions below for your reference.

view full answer...

Answer 5

Although both the Curt #C77NR and #C37BR both look to be identical there is a small difference in the #C77NR that allows it to be compatible with 2022 and 2023 Kia Niro models, whereas the #C37BR is only compatible with 2022 models.

view full answer...

Answer 6

We have the Curt Trailer Hitch Receiver #C77NR which is custom fit for your 2024 Kia Niro. This will give you a 2" receiver opening for a large selection of Ball Mounts #C45534 and hitch mounted accessories like a Bike Rack #NV22G. The Curt…

view full answer...

Answer 7

Hey Randy, there is a big enough difference between a 2019 and a 2023/2024 Kia Niro that a new hitch had to be made so you'd need to go with the part #C77NR.

view full answer...

Answer 8

The Tow Ready 2 Inch Hitch Ball, part #63845, you have referenced needs to be torqued to 250 foot pounds. It is recommended to frequently check that the ball is tightened to these specifications. If you are meaning the mounting bolts that are used to…

view full answer...

Answer 9

It's a pretty common practice to torque the lug nuts of a wheel to the recommended value and then check the torque value again after 50 to 100 miles to ensure they are still at spec. I've actually chosen to ignore the recommendation when I…

view full answer...

Answer 10

Since hitch bolts are torque-to-yield like with the etrailer hitch part #e98844 that you referenced it is not required that you retorque the hardware. Just one to spec and you're good.

view full answer...

Answer 11

Yes, the Curt hitch part #C77NR that you referenced is a confirmed fit for your 2023 Kia Niro EX HEV. This would be just what you would need.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Is there a Hitch for a 2024 Kia Niro EV?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching