Recommended Sidewinder Pin Box For A Grand Design Reflection 28BH

Question

Question:

Can you let me know the sidewinder I need?

asked by: Matt C

0

Expert Reply:

Based on the information you provided you have a 1621 bolt pattern so the Reese Sidewinder 5th Wheel King Pin with Rotating Turret # RP34FR would be the correct replacement for you. This will come with a generic wedge kit, but the # SWW-06 will be a better option to go with the B&W 5th wheel hitch you were looking at before.

expert reply by: Kevin C

0

Pin box serial tag
(click to enlarge)

Answer 1

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

view full answer...

Answer 2

This is a really good question. So the reason is because a Sidewinder pin box like #RP34FR puts quite a bit more twisting torque on the hitch and how it attaches to the vehicle. So it requires a hitch that attaches to the truck bed in at least four…

view full answer...

Answer 3

The holes are spaced 2-1/2" on the Curt Heavy-Duty Dual Ball Attachment for Weight Distribution Shanks item #C29NR. This will fit most if not all weight distribution shanks on the market. The hole spacing on Equalizer weight distribution shanks…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Doug, welcome back! Yes, we have the Andersen Ultimate Safety Chain Kit with Clevis Hooks #RM3230. This is the complete kit, Andersen doesn't have the attachments available individually. It is specifically designed for the gooseneck mount…

view full answer...

Answer 10

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 11

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 12

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Recommended Sidewinder Pin Box For A Grand Design Reflection 28BH

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching