What Propane Accessories Are Needed To Install A Dyna-Glo 30,000 BTU Wall Heater

Updated 11/03/2025 | Published 11/11/2023

Question:

I am wanting to use a 100 lb. propane tank for a 30,000 blue flame wall mount ventless heater. What all do I need???

asked by: Bobby

Helpful Expert Reply:

Dyna-Glo Blue Flame Wall Heaters require an external propane regulator and a have a 3/8" NPT fitting so you'd need to get a regulator and compatible pipe/hose fitting to connect to your propane source. Regulators have vents built into them that need to face down so depending on how you orient the line you could need either a vertical # 108220 or horizontal # 108221 regulator.

A hard copper line is preferred for permanent fixtures like this style of unit so you really should run a line from your RV's propane system to wherever this will be mounted. This should be done by a qualified technician so that there's no leaks. 3/8" NPT propane fittings can be found at your local hardware store to connect the piping from the source to the heater.

expert reply by: Kevin C

Steve C.

10/30/2025

Does the 20,000 BTU Dyno-Glo blue flame ventless wall heater use the same regulator as the 30,000 BTU?

Gwendolyn Y.

11/3/2025

@SteveC I did some searching and I am not able to find if they use the same regulators between the two heaters. You may have to reach out to Dyna-Glo directly to confirm with them. We don't carry their products and wasn't able to get that confirmation on their site.

Stevec

11/3/2025

@GwendolynY thank you for your time and effort.