6k Trailer Leaf Spring Replacement for 2019 Forest River Vengeance Rogue

Question

Question:

Looking for the right leaf springs for my 2019 Forrest river vengeance rougue 32v toyhauler bumper pull. It had 6k lb axles. I put the 26inch eye to eye on it and it seems to long.

asked by: Thomas E

0

Expert Reply:

The most common leaf spring size for a 6k trailer axle is 25-1/4 inches like what the part # e34SR is. It would be smart to measure what your old one is first though. We have a shorter spring with the part # e47SR which is 25-1/8 inches.

expert reply by: Jameson C

0

Answer 1

I reached out to my contact at Lippert and the Lippert Components Standard Axle Lift Kit #LC425750 will work just fine with your 5100lb Lippert Standard Single Axle. The #LC425750 does not have a weight capacity itself, much like how a hanger kit…

view full answer...

Answer 2

Hi Brett, You could replace your torsion axle with the Timbren Axle-Less Trailer Suspension #ASR3500S06, but you'll first want to confirm your trailer's GVWR and remove the lift spacers. These are rated for 3,500lbs so you'll want to be…

view full answer...

Answer 3

I have checked the installation instructions for the Dexter Trailer Springs Over-Under Conversion Kit #K71-385-00, and according to Dexter they strongly recommend tack welding the spring seats in place. Please note that this kit is intended for use…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

6k Trailer Leaf Spring Replacement for 2019 Forest River Vengeance Rogue

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching