Does Oil Around Shocks of Yakima Rack and Roll Trailer Indicate They Have Failed
Published 10/04/2023 >
Products Featured in This Question
Question:
I have an original Rack n Roll trailer pre Yakima the shocks look greasy, does that mean they failed? And lastly, my typical loads are 100-200 lbs. Would the HD shocks be too rigid and less forgiving on my kayaks? Photo attached
asked by: Chris A
Expert Reply:
Your current shocks are leaking fluid which is a sign they have failed. The oil inside the shock which provides the dampening is most likely gone to point the shock is no longer functioning and the suspension is really bouncy.
The HD shock kit part # Y08110 would replace what you have now and will allow the suspension to work like it needs to. It would not be rated too high for the 100-200 lb you'll have on your trailer.
Continue Researching
- Search Results: yakima watersport carriers
- Search Results: valve stem
- Shop: Yakima LowRider Kayak Trailer - 12" Black Alloy Wheels - 20' Boat - 750 lbs
- Shop: Heavy Duty Shocks for Yakima Rack and Roll Trailer - Qty 2
- Shop: Replacement Tire for Wheel on Yakima Rack and Roll Trailers - Qty 1
- Shop: Trailer Wiring
- Shop: Replacement Rubber Snap-In Valve Stem - 1-1/4" Long - Up to 100 psi
- Q&A: Will Heavy Duty Shocks Fit Yakima Rack and Roll Trailer 66" Trailer
- Shop: Malone MicroSport Trailer for 2 Heavy Kayaks - 7' Bunks - 800 lbs
- Shop: Yakima EasyRider Double Decker Trailer - 14-1/2' Long - 78" HD Crossbars - 500 lbs
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Review of the Heavy Duty Shocks for Yakima Rack and Roll Trailer
- Video: Comprehensive Review: Replacement Standard Shocks for Yakima Rack and Roll Trailer
- Shop: Roof Rack
- Video: Checking Out the Replacement Tire for Wheel on Yakima Rack and Roll Trailers
- Q&A: Troubleshooting Tire Pressure Leakage on Yakima Rack and Roll Trailer Stored for 18-Months
- Q&A: Should Yakima Rock and Roll Trailer Upgrade to Heavy Duty Shocks
- Q&A: Compressed Length of Yakima Replacement Standard Shocks # 8880177
- Q&A: How to Get Replacement Bearings for a Yakima Rack N Roll Trailer
- Q&A: How To Install Yakima LockNLoad Over Truck Bed with Tonneau Cover
- Q&A: Weight Capacity for Yakima Rack and Roll Trailers with Standard and HD Shocks
