How to Get Replacement Bearings for a Yakima Rack N Roll Trailer

Updated 06/07/2026 | Published 11/14/2024

Products Featured in This Question

etrailer Rubber Hitch Cover for 2" Trailer Hitches - Qty 1

(3321)

$12.69

Replacement Wheels for Yakima Rack and Roll Trailer - Qty 2

(37)

$364.49

Question:

Do you sell the wheel bearings for the Yakima Rack and Roll 66 I see you sell the axle. Do you know the part number of the bearings?

asked by: Geoff T

Expert Reply:

Geoff, the wheel bearings for the Yakima Rack N Roll is not available for replacement, unfortunately. To replace the bearings you'd need to replace the entire wheel with the Replacement Wheels for Yakima Rack and Roll Trailer # 8880157, which would include the bearings pre-installed.

expert reply by: Bryce D

Geoff

11/14/2024

Thanks Bryce, I found the bearings. They are PN 6302-2RS and they are available at Bed Bath and Beyond (of all places). I may need to replace the whole wheel if I damage the walls in removal but for now I will just buy new axles. Thanks again. Cheers Geoff

Bryce D.

11/14/2024

@Geoff Sounds good Geoff, I'm not sure where they got those part numbers because they don't come back to any Yakima products, but if it works it works! Let us know if you need anything else!

Brig

5/4/2025

@Geoff How did the bearing swap work out? Thanks.

Bigjoeg

3/2/2026

I can confirm that this is the correct bearing part number. I changed out my Rack-n-Roll bearings when I changed the tires. They were 12 years old and a bit "ratchety" when I changed them. Just make sure to buy decent bearings. Timken, SKF, NSK, etc. Stay away from the Amazon mystery brand bearings. The couple of bucks you save are nothing compared to the time it takes to swap the bearings and the peace of mind at 65mph.