How Difficult Is It To Install The Draw Tite DT62GR On A 2021 Ford Explorer

Question

Question:

I was hoping to find out how the draw-Tite 76910 Hidden Hitch®is installed on a 21 ford explorer. Im thinking of getting one but dont want to bite off more than I can chew.

asked by: Alexander

0

Expert Reply:

I can definitely help with that. Installing the Draw tite # DT62GR on a 2021 Ford Explorer will be a medium difficulty install. There is no drilling required. You will have to temporarily move the exhaust and an underbody panel. You will have to trim a section of the underbody panel, as well as some cutting of the heat shield.

Take a look at the video I have linked below. This shows installation of the etrailer class 3 hitch # e29YR on a 2020 Explorer. It will be an extremely similar installation process to the Draw tite hitch.

The following link will show you the manufacturer instructions if you are interested:

https://www.towingproducts.net/Application/support/instructions/N76910.pdf

expert reply by: Jesse M

0

Answer 1

I would be happy to help make a couple of recommendations for your 2017 Ford Explorer Sport Utility. As requested we do have a Draw-Tite hitch for your Explorer it is the Max-Frame Trailer Hitch Receiver item #76034. This hitch is custom fit and…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

How Difficult Is It To Install The Draw Tite DT62GR On A 2021 Ford Explorer

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching