Covers for 2024 Chevy Silverado 3500 Regular Cab Westin PRO TRAXX Oval Nerf Bar Brackets

Question

Question:

Are those 4 parts used to cover up the ends of the bars or are the bars already closed off?

asked by: Sammy

0

Expert Reply:

The bars in the Westin PRO TRAXX Oval Nerf Bar Kit # W93KD for your 2024 Chevy Silverado 3500 Regular Cab are closed off. The 4 parts you're referring to in the parts photo are actually covers for the mounting brackets. The parts aren't necessary but are included for a cleaner look once the installation is complete (see attached photo).

expert reply by: Jon G

0

4" Westin PRO TRAXX Oval Nerf Bars with Covers for Mounting Brackets Installed
(click to enlarge)

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 4

For your 1997 Ford F-250 HD with the SuperCab you can use the 3" Round DeeZee Nerf Bars #DZ3700291 or Westin Nerf Bars #25-0625 as custom fit options. The DeeZee Rough Step Running Board #DZ15331A isn't designed to fit your vehicle so if you…

view full answer...

Answer 5

Hey Therese, the Carr LD Custom Fit Side Steps #CARR113331 that you referenced are designed to attach to the rocker panels of the vehicle and not to the frame. A frame mount would be ideal but typically the frame is far enough from where you'd…

view full answer...

Answer 6

I reached out to my contact at Hopkins and your Reliance Brake Controller 47285 is functioning properly. The red button on the side is for emergency use and it will apply your trailer brakes with 100% power regardless of what you have the operating…

view full answer...

Answer 7

There's no reason you couldn't install a Load Range E trailer tire part #AM10140 on your wheels that are 4 lug trailer wheels. As long as your valve stems are rated for the extra pressure you wouldn't have any issues at all. You won't…

view full answer...

Answer 8

The caliper for the Titan Disc Brake Assembly #T10HREKITBB will sit partly over the rotor with the piston-side towards the inside of your trailer with the mounting bracket on the spindle-side of the spindle brake-mounting bracket. I have attached…

view full answer...

Answer 9

Hello Phillip. No, all of the side steps like the #CARR113331 require drilling for installation. If you do not feel like drilling, I recommend getting some nerf bars (running boards) as they mount to the existing holes on the frame of your vehicle so…

view full answer...

Answer 10

I'm happy to confirm that the WeatherTech Mud Flaps #WT69BV will fit your 2024 GMC Sierra 2500. These mud flaps are made in the USA, includes 2 front and 2 rear flaps, and has an easy no drill install.

view full answer...

Answer 11

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 12

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...