Recommend Front Mount Hitch for a 2023 Ram 2500 Diesel

Question

Question:

Will this fit a 2023 Ram 2500 diesel?

asked by: Rory

0

Expert Reply:

No, it will not but I have one that does. For your 2023 Ram 2500 with a diesel engine you will want the EcoHitch Hidden Front Mount Trailer Hitch item # EH37FR. This front mount hitch is custom fit and is compatible with both the diesel and gas engine models.

The Draw-Tite item # DT36MR does not fit the diesel models just the gas ones.

expert reply by: Jerred H

0

Answer 1

The issue with the Draw-Tite Front Mount Trailer Hitch Receiver #DT36MR is that the hitch is not a fit for your 2019 Ram 3500 with a diesel engine due to the interference you mentioned, so there's no way to get it installed properly. There is…

view full answer...

Answer 2

We do have a couple options for you, but the Draw-Tite Front Mount Trailer Hitch Receiver #DT36MR will not fit your 2021 Ram 2500 with the diesel engine. We also have the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR for your Ram. This…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Nice setup Jeff, happy to help! Since you've already ordered the B&W Turnoverball for your 2019 Ram 2500, my recommendation is the B&W Companion Sliding 5th Wheel Hitch #BWRVK3400-5W that's designed for the Turnoverball system.…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hey Shayne, yes the Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY57ND that you referenced would need the included spacers to install in place of a Lippert 1716 pin box as that pin box is 1/2 inch wider. What camper do you have? At this time…

view full answer...

Answer 12

Hey Brian, the Blind Spot Monitoring System for Towable Campers, Travel Trailers, and 5th Wheels Up to 30' Long #CU65XR that you referenced can give you a blind spot monitoring system but its not going to integrate into your vehicle wiring. It is…

view full answer...

Recommend Front Mount Hitch for a 2023 Ram 2500 Diesel

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching