Can Timbren Kit Install on 2001 Ford F-350 with Lift Kit

Question

Question:

Hello, I have a 2001 Ford F-350 that currently has a stock rear suspension in the rear and a leveling kit in the front. I am interested in the Timbren FR350SDE and FRTT350E enhancement systems for towing my toy hauler. Would either of these systems work if I were to add a half inch of lift in the rear? Please let me know if you need more info, I just want to make sure these would work with my current setup and if I were to add a little rake to the truck. - Thank you

asked by: Carlos A

1

Helpful Expert Reply:

Timbren kits like the part # TFR350SDE and the # TFRTT350E both can be used on vehicles with lift kits installed. Timbren makes spacers that can be added to the kits to take up the extra room created by the lifts. We have 1 inch spacers like the part # A25723-90AH00 and half inch part # TA25722-90P00.

Basically you would need to go with a spacer combo that matches the amount of lift the kit you install provides.

expert reply by: Jameson C

1

Answer 1

The Timbren rear axle jounce spring kit for Ford trucks that you referenced, part #TFR250SDE, is a correct fit for the 2002 F-250 Super Duty. This kit will fit both 2-wheel-drive and 4-wheel-drive versions and installs without drilling. The attach…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

Hey Kyle. Unless you're driving around with 1,500 lbs of gear in the bed of your 2025 Ford F-250, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs item #AL29DQ are not going to be overloaded. Your 5th wheel hitch and a full tank of fuel…

view full answer...

Answer 10

Hey Steve, The AirLift airbags with internal jounce bumpers are not able to be added to a system without so you would need to get a whole new system. With that said the system with the internal jounce bumpers is going to create a much rougher ride…

view full answer...

Answer 11

Hey Eric! For air bags I recommend going with Firestone. They make the most durable and reliable air bags for your 2024 F-250. If you don't mind using your phone to control the air compressor you can use the Firestone Ride-Rite Air Bags w/ Easy…

view full answer...

Answer 12

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Can Timbren Kit Install on 2001 Ford F-350 with Lift Kit

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching