Is the Base and Housing of the ComeUp UW-5000si Trailer Winch Made of Metal or Plastic?

Question

Question:

Does the ComeUp winch have a metal housing or base? Basically, what Im specifically asking about is the base of the winch where the mounting bolt holes are located.

asked by: L. J

0

Expert Reply:

It is plastic. The ComeUp UW-5000si Trailer Winch item # CU645010 is a light duty winch so it's housing and base are made of plastic.

I attached a picture below that will show you the base. I've also linked an installation video that will go over the features of the winch.

expert reply by: Jerred H

0

ComeUp UW-5000si Trailer Winch
(click to enlarge)

Answer 1

Thanks for reaching out and on your new trailer, Eric! The Lippert Smart Jack #LC643589 is great in theory, but they've had issues with water leaking into the head, and I haven't recommended one since I found out that they don't cover…

view full answer...

Answer 2

We have the perfect winch for you to pull your 3,000 lb car onto your trailer, the ComeUp UW-5000si Trailer Winch #CU645010. This 5,000 lb static load/50,000 lb rolling load winch has a wireless remote (which is also waterproof) that will let you…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…

view full answer...

Answer 5

Hey Rob. The Spacer Kit item #RP61301 will allow you to install the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter item #RP85FR on a Lippert 1116 pin box. You can also purchase the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride…

view full answer...

Answer 6

Hey Juan! The Replacement Wireless Remote for ComeUp Seal Recovery Winches #CU881102 is actually the 883822 you're looking for. Our part number reflects the original 881102 which has been replaced by the 883822 so it will work with your winch.

view full answer...

Answer 7

Hey Todd! The replacement for your 1510000140 is the Replacement Control Unit for Kwikee 40 Series Electric RV Steps #LC363985. Any big plans with the Odyssey once you get the stairs up and running again?

view full answer...

Answer 8

Hey Chris, yes the part #MC62YR does have the 50.336 motor like you are looking for.

view full answer...

Answer 9

Hey Brian! Yes, the power unit on the Bulldog Winch Trailer Winch #BDW10030 can be moved to another location. It doesn't come with a bracket to mount on top, so you would have to figure that out yourself. They actually used to make a relocation…

view full answer...

Answer 10

We do have an option for replacing your Elixir ELX-60. Unfortunately there is not going to be a direct replacement for the converter section. You will need to replace the entire panel with the Progressive Dynamics 4500 Series RV Converter…

view full answer...

Answer 11

The correct replacement cover for your Ventline Northern Breeze VB0568 Roof Vent is the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents #BV0554-01 for white, or #BV0554-03 for smoke. I have attached a couple of videos for you to…

view full answer...

Answer 12

Thank you for the pictures. I do have a potential solution for you, but the Ventline northern breeze has been discontinued. We actually used to sell them here. The last one we sold was in 2018. I know this is not what you were hoping to hear, but…

view full answer...

Is the Base and Housing of the ComeUp UW-5000si Trailer Winch Made of Metal or Plastic?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching