Replacement Galvanized Idler Hub For 2000 EZ Loader Model 1-EZL90B 15-12 2100 NB Boat Trailer

Question

Question:

Looking to buy vortex galvanized hubs for this trailer. Which model is the correct one?

asked by: Michael G

0

Expert Reply:

I reached out to EZ Loader to verify the correct parts for your boat trailer. They informed me it uses the Bearing # L44649 for both inner and outer and a grease Seal # 34823 with a 1.249" inner diameter. The CE Smith Trailer Idler Hub Assembly # CE13315 is our galvanized hub which uses these components as we do not carry the Vortex hubs brand.

expert reply by: Bud M

0

EZ Loader Boat Trailer Frame Tag
(click to enlarge)

Answer 1

I reached out to EZ Loader who provided me with the part numbers you are needing. Inner Bearing #L68149 Inner Race #L68111 Outer Bearing #L44649 Outer Race #L44610 Grease Seal #168255TB The 7-Piece Installation Set #PTW83020 and Seal Puller #PTW1219…

view full answer...

Answer 2

I don't have a way to look up exact parts for a specific trailer but based on some research online it looks like the trailer might have a weight carrying capacity of 2,350 lbs and in which case you likely have either a 2,000 lb or 2,200 lb axle.…

view full answer...

Answer 3

The hub you referenced is not galvanized and we do not have any similar ones that are since that bolt pattern is a little unique.

view full answer...

Answer 4

Based on your photo it looks like you have 2,700 lb axles, and we do have hubs for that size axle. However, you will need to confirm the bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 10

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Replacement Galvanized Idler Hub For 2000 EZ Loader Model 1-EZL90B 15-12 2100 NB Boat Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching