Replacement Brakes for Haulmark HMVG716T-3000 Enclosed Trailer

Published 09/20/2023

Question:

I am trying to find brake assemblies for my Haulmark trailer, but I can seem to sort out which assembly would fit my trailer. Could someone help with this? Haulmark HMVG716T-3000

asked by: Robert J

Expert Reply:

Based on the information I found about your Haulmark HMVG716T-3000 it looks like you have 3,500 lb axles. I recommend verifying this information before getting new brake assemblies. The best way to do this is to check your axle tags and see if it is listed. If you don't see the capacity you can also contact the axle manufacturer with the serial number and they will be able to identify it.

For brakes that fit a 3,500 lb axle you can use the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies # AKEBRK-35-SA. These brakes fit a 4-bolt brake flange and measure 10" x 2-1/4". They are self-adjusting so there is no need to remember to adjust them periodically.

I have attached an installation video below for your reference.

expert reply by: Robin H