Replacement Prop Rod Assemblies For Leer Tri-Fold Hard Tonneau on 6'8" Bed of 2021 Ford F-350

Question

Question:

Hi, I have a tri-folding hard top Leer tonneau cover for a 2021 Ford F350 with a 6-8 bed. I do not know the model number. I need replacement prop rods. Please advise me. Thank you!

asked by: Michael C

0

Expert Reply:

Hey Michael,

The Leer tri-fold hard tonneau cover that fits your 2021 Ford F-350 with a 6'8" bed is the Leer Hard Tonneau Cover - Tri Fold # LE42FR. We do have the correct replacement prop rods for that tonneau cover, and for that all you need is the following:

- Replacement Prop Rod Assembly for Leer Tonneau Covers # LE54MR

expert reply by: Kyle S

0

Michael C.

11/1/2024

Thank you, Kyle! MC

Answer 1

For your Leer Hard Tonneau Cover #LE82FR on your 2019 GMC Sierra 1500 you'll need the Replacement Prop Rod Assembly for Leer Tonneau Covers #LE37MR.

view full answer...

Answer 2

The #LE77FR is for the 5' bed so you must have the #LE87FR since you have a 6' bed on your 2020 Chevy Colorado. The parts are listed for the cover they fit instead of by length to ensure you get the correct part since they are cover specific.…

view full answer...

Answer 3

We do have the part you need, but it's different than the one you mentioned. I checked with Leer, and the correct replacement prop rod for the Leer Hard Tonneau Cover #LE42FR on your 2018 Ford F-250 is the following: - Replacement Prop Rod…

view full answer...

Answer 4

No, the Replacement Prop Rod Assembly for Leer Tonneau Covers #LE54MR is not the correct fit for a Leer HF350M tonneau cover. We currently have 3 replacement prop rods for Leer HF350M tonneau covers. - Replacement Prop Rod Assembly for Leer Tri-Fold…

view full answer...

Answer 5

Hey Chris, For the Leer Hard Tonneau Cover #LE54MR on your 2015 Ram 1500 6.5' bed you'll need the Replacement Prop Rod Assembly #LE24MR.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 12

Hi Jim! With your 2026 Winnebago 2000MRB having a 5,500 pounds GVMR, I think the Curt TruTrack Weight Distribution System #C17499 is going to be a little overrated for you. Your loaded tongue weight should be as close to the middle of the systems…

view full answer...

Replacement Prop Rod Assemblies For Leer Tri-Fold Hard Tonneau on 6'8" Bed of 2021 Ford F-350

Continue Researching