Replacement Shroud for Coleman TSR AC Unit

Question

Question:

Looking for replacement shroud for a Coleman TSR air conditioner .This is in my motorhome.

asked by: Tomi C

0

Expert Reply:

I looked up your Coleman TSR AC and found that the correct shroud for it is the part # MA8335A5261.

expert reply by: Jameson C

0

Answer 1

I spoke with Airxcel who now owns Coleman-Mach and they informed me that the correct replacement shroud for your Coleman-Mach Air Conditioner is the MaxxAir Replacement Shroud for Coleman-Mach part #MA8335A5261.

view full answer...

Answer 2

Although the design details like the ventilation slot pattern may differ from your original, we do have a replacement shroud for the Coleman-Mach branded RV air conditioning units. Based on your part reference 7330-713 you can use the MaxxAir part…

view full answer...

Answer 3

Can you email me the pictures? Its going to be one of the following two though. Either part #MA00-325001 or #MA8335A5261. Whichever looks like what you have would be correct.

view full answer...

Answer 4

Based on your model number the Replacement RV Air Conditioner Cover #MA8335A5261 is the correct shroud for your Coleman 7300 series.

view full answer...

Answer 5

I was unable to find any reference to the numbers you listed, but based on the dimensions you gave my best guess is you need the MaxxAir Replacement Shroud for Coleman-Mach / RVP Brand RV Air Conditioners #MA8335A5261. This is for older Coleman-Mach…

view full answer...

Answer 6

The MaxxAir Replacement RV Air Conditioner Cover #MA8335A5261 is the correct replacement for your RVP 8000 series Air Contioner.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Shroud for Coleman TSR AC Unit

Continue Researching