Replacement Air Conditioner Shroud For RVP 8000 Series Air Conditioner On 1999 Fleetwood Wilderness

Question

Question:

I have a 1999 Fleetwood Wilderness G1 camper. I need a replacement shroud for the AC . It is an RVP 8000 series, model #8333-8664. Do you have one of these?

asked by: Glori T

0

Expert Reply:

The MaxxAir Replacement RV Air Conditioner Cover # MA8335A5261 is the correct replacement for your RVP 8000 series Air Contioner.

expert reply by: Bud M

0

Answer 1

The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White #MA8335A5261 is the correct fit for your 7300 series RVP. The shroud is 37 inches by 25 by 13-1/2 inches. If you don't want the two piece unit…

view full answer...

Answer 2

The RVP 8000 series AC model 8333A871 is effectively a Coleman Mach air conditioner, as RVP is the parent company and owner of the Coleman AC line of products; this means they will have the same wiring connections as a Coleman unit. To replace an…

view full answer...

Answer 3

I spoke with Airxcel who now owns Coleman-Mach and they informed me that the correct replacement shroud for your Coleman-Mach Air Conditioner is the MaxxAir Replacement Shroud for Coleman-Mach part #MA8335A5261.

view full answer...

Answer 4

Based on your model number the Replacement RV Air Conditioner Cover #MA8335A5261 is the correct shroud for your Coleman 7300 series.

view full answer...

Answer 5

Can you email me the pictures? Its going to be one of the following two though. Either part #MA00-325001 or #MA8335A5261. Whichever looks like what you have would be correct.

view full answer...

Answer 6

Although the design details like the ventilation slot pattern may differ from your original, we do have a replacement shroud for the Coleman-Mach branded RV air conditioning units. Based on your part reference 7330-713 you can use the MaxxAir part…

view full answer...

Answer 7

I looked up your Coleman TSR AC and found that the correct shroud for it is the part #MA8335A5261.

view full answer...

Answer 8

I was unable to find any reference to the numbers you listed, but based on the dimensions you gave my best guess is you need the MaxxAir Replacement Shroud for Coleman-Mach / RVP Brand RV Air Conditioners #MA8335A5261. This is for older Coleman-Mach…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Replacement Air Conditioner Shroud For RVP 8000 Series Air Conditioner On 1999 Fleetwood Wilderness

Featured Help Information

Miscellaneous Media

Continue Researching