Search: break away battery box   >  

Hey Philip so while we don't carry the exact spring you are looking for it does match the specs of the #e59SR so this would be a great solution. It's correct length at 23-1/8 inches and is for a 3,500 lb trailer axle like you have as well.

I checked with Dexter and they indicate that for hub 008-386-80: "Available for service parts only." Meaning the actual hub assembly is not available but parts for it are such as the 35mm cartridge bearing #31-72-3. There isn't a way to…

The part number 072-097-00 is for a Dexter leaf spring. Our closest equivalent would be the 5-Leaf Double-Eye Spring item #e34SR. This is a 3,000 lbs spring that works with 6,000 lbs axles. It measures 25-1/4" long from eye hole to eye hole.…

Trailer wiring generally uses 16 gauge wire, part #16-1-1. However, with a long trailer like yours you may want to go with a larger like 14 gauge #DW07550-1 or even 12 gauge #12-1-1. Each size is sold by the foot. You will need to have the lights at…

With our experiences installing and using the various electric over hydraulic actuators out there the consensus is that the Hydrastar actuators have the quickest response time and are the most reliable. All of our installers when asked will say that…

It is possible to weld on a brake flange such as Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K #4-34 for 1-3/4" round axles, but it takes a qualified welder and even then it can be difficult to accomplish. A better solution is…

Yes the bracket part #A91BOB is compatible with the LED light part #LPL91CB that you referenced.

I would be happy to help you choose the correct brake setup for your Dexter Torflex Axle, however there are no manufacturers that currently make electric disc brakes. All disc brakes are powered by a hydraulic cylinder. If you wish to use a disc…

For a disc brake kit for your 8k axles you'd want the #K2HR858DD which is a disc brake kit for that axle. For a kit for the electric over hydraulic actuator with lines and a breakaway the best kit option we have is the HydraStar kit part…

We have the exact seal you would need. For a pair you would want the part #RG06-050. This is a double lip seal that would work great for you. Double lip seals aren't only for EZ lube spindles. They are just basically a better sealing design than…

There isn't a way to convert a latch, and there aren't any yoke latch repair kits unfortunately, so the best we can offer is a replacement A-frame coupler. If you want to stick with the yoke-style latch you can use the 8,000 lb A-Frame…

If you are looking to reduce the weight of your battery then the best option is to switch to lithium which are up to 30% lighter than lead acid. In regards to the exact size you need, I really don't recommend straying away from the size the…