Trailer Hitch Confirmed to Fit a 2024 Dodge Hornet

Question

Question:

Looking to add a hitch to my 2024 Dodge Hornet.

asked by: Oscar

0

Expert Reply:

You're in luck! We have a great hitch option for your 2024 Dodge Hornet.

- Curt Trailer Hitch Receiver # C77VV

This hitch has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers, and ball mounts.

If you plan to do any towing, you can round out a tow package by adding the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 and the etrailer Ball Mount Kit # 989900.

expert reply by: Scott S

0

Answer 1

I attached a picture that shows the Curt hitch part #C77VV installed on a Hornet to show you where the hitch opening will sit once installed. It does fit right to the bottom of the rear bumper.

view full answer...

Answer 2

Yes, there is! To add a hitch to your 2024 Dodge Hornet, I recommend the Curt item #C77VV. This hitch is custom fit and bolts to your Dodge with included hardware. This is a class III hitch with a 2" receiver. It has a 2,000 lbs towing capacity…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Trailer Hitch Confirmed to Fit a 2024 Dodge Hornet

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching