Could Valterra RV Water Tank # R8048 be Mounted Vertically

Question

Question:

Can this be mounted and used vertically?

asked by: Emil

0

Expert Reply:

The only reason mounting the Valterra RV Water Tank # R8048 would be challenging would be the drain hole location. If you could come up with a way for it to be accessed on the bottom of it when vertical this would work just fine. Maybe have a hole cut in the floor so that the line ran to it would go through the floor.

expert reply by: Jameson C

0

Answer 1

Hi Elliott; the Valterra RV Water Tank #R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture, one has a red plug. The tank is only designed to be gravity fed or used with a hand pump, not an…

view full answer...

Answer 2

Hello Scott, thanks for reaching out. The largest water tank we offer is the Valterra RV Water Tank #R8048 which is 48" x 8" x 16". This tank is more for fresh water though, and we unfortunately do not offer a black water tank that…

view full answer...

Answer 3

Hi Jared! The 24 gallon 48" x 8" x 16" Valterra RV Water Tank #R8048 weighs just under 16 pounds (15.8 pounds, to be exact). If you were also wondering how much this would weigh with 24 gallons of water in it (I was), that would be 215…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 8

Hey Josh! Yes, the Pacbrake Alpha XD Pro Air Bag Suspension Kit w/ Internal Jounce Bumpers #PB89RV will fit your Sprinter. This is specifically designed for models with dual rear wheels. The only reason these wouldn't work is if you have the ride…

view full answer...

Answer 9

Hey Steve, RV AC units are designed to be powered by AC power and not DC like what a battery like what part #RS74VR provides but if you have a power panel in your RV it will have AC power circuits and it will be wired up so that the panel can draw…

view full answer...

Answer 10

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 11

Hey Chris! Yes, PowerMax converters like the #PM34VR 45 amp, #PM94VR 55 amp, #PM44VR 60 amp, and #PM84VR 100 amp can supply 12V DC power to your system even if a battery isn’t connected. When plugged into shore power, they’ll convert AC power to 12V…

view full answer...

Answer 12

Hey Brad! We have a couple of great options for locking the Gen-Y Executive gooseneck pin box on your Brinkley RV! My first recommendation is the InfiniteRule SnapLatch Coupler Lock #IR48FR. This lock is specifically designed for Gen-Y's…

view full answer...

Could Valterra RV Water Tank # R8048 be Mounted Vertically

Continue Researching