Result: camping table

Hi Jordan! The Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle #DX76ER uses bearings and seals that are made overseas. They aren't really "branded", per se, but Dexter does have them made specifically for them. If you…

Hi Elliott; the Valterra RV Water Tank #R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture, one has a red plug. The tank is only designed to be gravity fed or used with a hand pump, not an…

Hi Jared! The 24 gallon 48" x 8" x 16" Valterra RV Water Tank #R8048 weighs just under 16 pounds (15.8 pounds, to be exact). If you were also wondering how much this would weigh with 24 gallons of water in it (I was), that would be 215…

Hey Angela, you’re thinking about this exactly the right way. Electric tongue jacks are sized based on tongue weight, not total trailer weight. With your 750–800 lb tongue weight, the 3,500 lb models of our etrailer electric trailer jacks #e72QV or…

Tyler, great question - and it’s definitely more than cosmetic. The etrailer electric trailer jacks #e72QV and #e22QV are mechanically identical 3,500 lb jacks. Same motor, same lift height of 18", same 7-way plug power. The only difference is…

Hey Mark! All three of these etrailer jacks - the #e72QV 3,500 lb, the #e22QV 3,500 lb with SnapPad, and the #e82QV 5,000 lb with SnapPad - are powered directly through your truck’s 7-way plug. So with your Silverado’s factory 7-way, you can simply…

The only reason mounting the Valterra RV Water Tank #R8048 would be challenging would be the drain hole location. If you could come up with a way for it to be accessed on the bottom of it when vertical this would work just fine. Maybe have a hole cut…

Hello Scott, thanks for reaching out. The largest water tank we offer is the Valterra RV Water Tank #R8048 which is 48" x 8" x 16". This tank is more for fresh water though, and we unfortunately do not offer a black water tank that…

I've attached the installation instructions for the Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch - Remote - 2,000 Watts - 12V #PD64FR for you below.

Hi Alex; are you specifically looking for the TorkLift extension? The #TLE1636 is designed for the factory 3" receiver on Ford trucks. Do you have the TorkLift SuperHitch #TLD1109 on your Ram? If you do, the TorkLift SuperTruss Hitch Extension…

Hey Tom! The Red Trimax King Pin Lock #TMX36RR and the Yellow Lock #TMX56RR are literally the same lock, just with different colors. I'm not sure why there's a price difference like that, but usually I tell people to take advantage of the…

The Camco RV Fresh Water System Backflow Preventer, part #CAM23402 is designed to be used with a 3/4 inch hose so the threads would be for a hose and not pipe. This is designed to be used with flexible plumbing hoses and is not designed for water…