Trailer Wiring Harness for 20233 Hyundai Tucson without Tow Package

Question

Question:

I have a 2023 Hyundai Tucson hybrid. I dont have factory tow package. I want to add a hitch but need to know if you have a light wiring kit available.

asked by: Joe

1

Helpful Expert Reply:

The Curt trailer wiring kit part # CU94FR fits versions of the 2023 Hyundai Tucson that do not have the factory tow package so it would work for you. It installs really easily by plugging in at the rear of the vehicle.

expert reply by: Jameson C

1

Answer 1

The location of the connector for connecting the Curt Wiring Adapter #C77BR on your 2023 Hyundai Santa Fe is under the dash to the left of the steering column. The 4-pin connector is cream colored and should be exposed. Be sure to look and feel…

view full answer...

Answer 2

If your trailer has separate turn signals from the brake lights and you want them to remain that way, you will need to use a special converter. On the trailer side, behind the 7-Way, you will attach the Vehicle to Vehicle Taillight Converter,…

view full answer...

Answer 3

I was able to find the older style Primus Brake Controller part number 39515 installation instructions and I attached the picture to the right for you to check out. The flipper switch on the side of the controller does control the aggressiveness of…

view full answer...

Answer 4

If you are using the Wiring Kit #5506 to install the Tekonsha Prodigy P2 #90885 then you will want to use the 30A breaker on the power wire for the brake controller. I have attached a helpful article and a picture that you can use for the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Trailer Wiring Harness for 20233 Hyundai Tucson without Tow Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching