How to Get Replacement Arms For Roadmaster Direct-Connect Base Plates

Question

Question:

Hi, I bought a Roadmaster Direct-connect Base Plate Kit - Removable Arms from you all. I need to purchase 2 replacement removable arms. Do you carry them? Any advice?

asked by: Timothy M

0

Expert Reply:

I do have advice, as to get replacement arms for your Roadmaster direct-connect base plates you need the following:

- Roadmaster Replacement Arms for Base Plate Kits # RM-ARMS

expert reply by: Kyle S

0

Answer 1

We do have replacement arms available for your Roadmaster EZ5 Base Plate Kit #RM-521569-5 with part #RM-ARMS. When the original base plate brackets and arms are manufactured, they are made as one single part. So to be sure that the replacement arms…

view full answer...

Answer 2

Hey Patrick, Roadmaster doesn't sell the C002383 arms as standalone items, though you can still get them, but what you need in order to do so is the Roadmaster Replacement Arms for Base Plate Kits #RM-ARMS. On this page you'll click on the…

view full answer...

Answer 3

I pulled up the owners manual of your 2020 Buick Envision and on page 297 it states the vehicle can be flat towed without excluding the FWD models. The first thing you'd need is a base plate kit like the part #RM-523196-5 which is a confirmed fit…

view full answer...

Answer 4

When setting your 2020 Buick Envision up to flat tow you'll turn the ignition on to place the transmission into Neutral but after placing it in neutral you'll want to turn the ignition back to the off position. So the engine shouldn't be…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

How to Get Replacement Arms For Roadmaster Direct-Connect Base Plates

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching