Ball Mount For Volvo XC90 With Draw-Tite Hitch 76194 to Tow U-Haul Trailer

Question

Question:

I bought this part a few years ago from you: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2inch part 76194 Now we need a ball mount hitch to pull a small 5x8foot uhaul cargo trailer. Can you tell me which part it is that we need to do that? and send me a link to buy it. Thanks.

asked by: Laura S

0

Expert Reply:

For your Volvo XC90 with the Draw-Tite # 76194 trailer hitch, you'll need a ball mount with 4-1/2" to 5" of rise, and we have the exact part for that. You'll also need a hitch ball and hitch pin, so I'll go ahead and list out below exactly what you need:

- Draw-Tite Ball Mount - 4-3/4" Rise # 40346

- 2" Hitch Ball # 40038

- Hitch Pin # ML1465DAT

expert reply by: Kyle S

0

Answer 1

I recommend pairing the T-One Vehicle Wiring Harness #118683 with the Draw-Tite Max-Frame Trailer Hitch Receiver #76194 you found for your 2019 Volvo XC90 T6 Inscription. This harness will provide you with a 4-way flat to operate the lights on most…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

Answer 10

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Ball Mount For Volvo XC90 With Draw-Tite Hitch 76194 to Tow U-Haul Trailer

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching