Bumper Clearance for 23" x 51" UWS Cargo Carrier for 2" Hitches

Question

Question:

For the 23 x 51 UWS Cargo Carrier for 2 Hitches - Item # UWS65XR Can you supply the measurement from center of hitch pin to closest edge of carrier ? Thanks in advance.

asked by: Steven G

1

Helpful Expert Reply:

The 23" x 51" UWS Cargo Carrier for 2" Hitches # UWS65XR measures about 6" from the center of the hitch pin hole to the nearest part of the carrier. I confirmed this with my contact from UWS.

expert reply by: Jon G

1

Answer 1

Good morning Kenyon, yes the 23" x 51" UWS Cargo Carrier for 2" Hitches - Aluminum - 500 lbs #UWS65XR can be used on the back of a travel trailer or RV. Some carriers have limitations or restrictions on this topic, but luckily this one…

view full answer...

Answer 2

The hitch I recommend for your 1998 Jeep Wrangler TJ is the Curt #13408. It is a Class III, 2" hitch with a towing capacity of 4,000 lbs and a tongue weight capacity of 400 lbs. The customers who have used this hitch rave about it, with over 200…

view full answer...

Answer 3

The Curt Cargo Carrier #C18113 is going to provide 6-1/2" of clearance from the center of the hitch pin hole to the front of the basket. A better choice, that will provide approximately 11" of clearance from the center of the hitch pin to…

view full answer...

Answer 4

Hey Tom! The 22-1/2x49 Curt Cargo Carrier #C18113 has a steel shank. This is necessary to keep the higher capacity of 500 lbs. The rest of the carrier is aluminum which keeps the overall weight at 25 lbs. What do you plan on using the cargo carrier…

view full answer...

Answer 5

The interior dimensions of the 23" x 51" UWS Cargo Carrier for 2" Hitches #UWS65XR is 20-1/2" x 48 1-/2". As far as a floor, there is not a traditional floor but there are strips of aluminum that line the bottom vertically…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Bumper Clearance for 23" x 51" UWS Cargo Carrier for 2" Hitches

Continue Researching