Will The Curt C45FV Activate Tow Mode On A 2023 Mazda CX-50?

Question

Question:

Will tow mode work on the CX50 when using this harness?

asked by: Marc

0

Expert Reply:

Unfortunately the Curt wiring harness # C45FV would not activate the tow mode on your 2023 Mazda CX-50. According to Mazda, only their OEM wiring harness will work with the tow mode. You can absolutely still use the # C45FV to work your trailer lights, but the tow mode will not activate.

expert reply by: Jesse M

0

Answer 1

For a hitch that fits your 2023 Mazda CX-5 Carbone Edition I recommend the etrailer #e98902. This hitch has a concealed cross tube and a bolt-on installation. What sets it apart from others is the matte black finish. This gives it an OEM look and…

view full answer...

Answer 2

To add a hitch to your 2024 Mazda CX-50, I recommended the Curt item #C38BR. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Answer 3

Hello Ric, thanks for reaching out. The only hitch we have confirmed to fit the 2025 Mazda CX-50 Hybrid is the Curt #C33MJ. We have confirmed with Curt that this will fit the Hybrid model. We have also heard back from a few of our own customers who…

view full answer...

Answer 4

Hey Mike, so I checked with Curt and their hitch part number 13630 which is our part number #C33MJ does fit the 2025 Mazda CX-50 hybrid. Curt says this actually fits all models of the vehicle actually. What are you planning on using the hitch for?

view full answer...

Answer 5

Hello again, John. Yes, the Curt T-Connector #C45FV will fit the 2025 Mazda CX-50 Hybrid. I just checked with Curt and they confirmed it to fit all models of the 2025 CX-50 and this includes the hybrid models.

view full answer...

Answer 6

Hello Wendello, We most definitely do! You will want the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C33MJ. The #C33MJ is confirmed to fit the 2025 Mazda CX-50 Hybrid model. If you need some wiring to go with it for some light…

view full answer...

Answer 7

Hey there Moyer, that's a great question, but I don't know why your dealer was telling you that. The Curt T-Connector Vehicle Wiring Harness #C45FV does not require flashing or reprogramming after installation, and we haven't had any…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Mike, yes the Tekonsha trailer wiring harness part #TK85VR that you referenced does fit the hybrid models of the 2025 Mazda CX-50 like you have. This does install to the battery in a different way like you mentioned since the battery is in a…

view full answer...

Answer 10

For your 2023 Mazda CX-5, I recommend checking out the: -Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit #76138. This trailer hitch has a maximum towing capacity of 4,500-lbs, a maximum tongue weight capacity of 675-lbs, and has a class III…

view full answer...

Answer 11

Hello Bruce. We actually get this question a lot, and I can tell you that the 12v accessory outlet at the rear of your vehicle is not safe to use as a power source for a converter module. The converter must be wired directly to the battery. This is…

view full answer...

Will The Curt C45FV Activate Tow Mode On A 2023 Mazda CX-50?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching