Is a 2,000LB Axle With Hub Face Measurement of 70.5" a Commonly Found Size?
Published 07/14/2023
Products Featured in This Question
Question:
I am in need of a 2000lb trailer axle. My current axkebent spindle has a tag on the axle that reads 70.5 inch hub face, 59 inch spring centers. It is a underslung axle,springs mount on underside if axle. The spring mounts are 21 inches center to center. Is this a common or available axle?
asked by: David
Expert Reply:
This is not a common axle size. The Axle # e32GR is going to be our closest to your current axle. This axle has a 72" hub face with spring center of 58". You may be able to use this axle if you have the clearance for your tires to be moved out 3/4" on each side of your trailer. The current spring seats can be cut off and 2 new Seats # TRSS175 can be welded on at the 59" spring center you have. A U-Bolt Kit # CE23000 will allow you to attach this axle to your current leaf springs.
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Search Results: trailer leaf springs
- Video: Review of CE Smith Trailer Leaf Springs - Slipper Springs - CES73JR
- Shop: CE Smith 24-5/8" Slipper Leaf Spring - 250 lb Load - 1-3/4" Wide - Single Leaf - Steel
- Video: Hands-On with the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Shop: Trailer Wiring
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Shop: Shackle Bolt with Locknut For Double-Eye Springs - 1/2" Diameter - 3" Long
- Shop: 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Q&A: Recommended Replacement Straight Axle for a Carry-On Trailer
- Q&A: How to Measure for a Replacement Axle, Hubs, and Leaf Springs for a Boat Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Q&A: Do you Have Smaller Wheels and Tires for My Teardrop Camper so I can Easily Store in Garage?
- Article: How to Measure a Boat Trailer Axle
- Q&A: Replacement Hub that Has Bearings L44649 and Bolt Pattern 5 on 4-1/2 inch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Choose Replacement Axle for Lowe's 5x8 Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Recommended 2,000 lbs Axle w/ a 72" Hub-Face-to-Hub-Face Measurement
- Q&A: What is The Difference Between Having Trailer Axles Above or Below the Leaf Springs
- Article: Trailer Tire Sizing
- Article: Trailer Lighting Requirements