Availability of PA66-MD40 For a 2007 Dodge Dakota

Question

Question:

sorry , hit the wrong key should be PA66-MD40 2007 DOKOTA are they still available Since Im here I need a spare tire mounting cable assembly, tired of carrying spare in bed.

asked by: Bruce

0

Expert Reply:

Yes, the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket # PK11893-11933 is still available. This is the same as the PA66-MD40 which fits your 2007 Dodge Dakota.

For your spare time mounting cable assembly you will want to contact a local salvage yard or auto parts dealer. The closest thing we have it the Lippert Spare Tire Winch # LC159056 which is designed to be used on trailers and requires a custom mount.

expert reply by: Bud M

0

Answer 1

The Lippert Components Spare Tire Winch #LC159056 that you referenced is currently the only item of its type that we offer. For use with this we offer an extension #LC1315411 that works with a crank handle. We do have other types of spare tire…

view full answer...

Answer 2

The Lippert Components Spare Tire Winch with Offset Cable #LC159056 will not have any locking or hold mechanism short of being completely reeled in. I spoke to my tech contact at Lippert who has this on his truck and he said you just crank it up…

view full answer...

Answer 3

Lippert Components Spare Tire Winch #LC159056 has a 1/2-inch round crank fitting and uses Replacement Crank Extension #LC1315411. One end of this part has a 3/4-inch hex shape to mate with a crank handle. If you have a crank handle with a 3/4-inch…

view full answer...

Answer 4

If you check out the diagram I attached of the side of the Lippert Components Spare Tire Winch #LC159056 that mounts you can see that the distance between the mounting hole locations is 5-1/4" on center. I reached out to my contact at Lippert…

view full answer...

Answer 5

I spoke with my contact at Pollak and he stated that the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket, #PK11893-11933 is the correct replacement part for the Pollak PA66-MD40 that you have.

view full answer...

Answer 6

Are you certain it is a Pollak PA66-ND40 as opposed to a Pollak PA66-MD40? The only reason I ask is we do have a replacement for the MD40, which is the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket #PK11893-11933 which we know has been…

view full answer...

Answer 7

Hey Mike, I spoke with my contact at Pollak and he stated that the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket, #PK11893-11933 is the correct replacement part for the Pollak PA66-MD40 that you have.

view full answer...

Answer 8

Hey Lisa, To flat tow your 2020 Jeep Grand Cherokee Trailhawk you'll need the Blue Ox Tow Bar Wiring Kit #BLU86XR. This wiring harness comes with connectors to plug inline with your factory tail light wiring. If you haven't picked out the…

view full answer...

Answer 9

The Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket for Dodge/Chrysler #PK11893-11933 will fit 1999 Dodge Ram 2500's that came with a 7-way connection from the factory. The 7-way socket will require drilling of new holes as it does…

view full answer...

Answer 10

Since you are limiting your trailer to 10000lbs, and the average tongue weight is 10-15% of the trailer weight, you are looking at 1000-1500lbs tongue weight. With that said it is a good idea to use a jack with a larger capacity as it will be able to…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Availability of PA66-MD40 For a 2007 Dodge Dakota

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching