Replacement for Pollak PA66-MD40 Connector

Question

Question:

I have a Pollak PA66 ND 40 plug for the back of my Sprinter RV. Do you have that plug

asked by: Bob

0

Expert Reply:

Are you certain it is a Pollak PA66-ND40 as opposed to a Pollak PA66-MD40? The only reason I ask is we do have a replacement for the MD40, which is the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket # PK11893-11933 which we know has been a replacement for Sprinter RVs. I have been unable to find any type of reference to a ND40 connector.

expert reply by: Kyle S

0

Answer 1

To hang a wiring connector from the Curt Trailer Hitch Receiver #C13388 on your 2021 Mercedes-Benz Sprinter 2500 you need a No-Drill Mount Bracket #C57202 and then you can use the Bracket #18144 for the 4-Way #C59236 or the Bracket #18138 for the…

view full answer...

Answer 2

If your 7-way was factory installed (you can tell by looking for the Mopar logo of the cover for the 7-way), it will have the rectangular connector used by the #PK11933 which would plug into the factory connector. For a replacement 7-way connector,…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

Answer 5

Hey James, welcome back! The only plug and play wiring harness I have for flat towing is the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR. This has a 4-way connector that plugs into your motorhome. This plug and play harness…

view full answer...

Answer 6

Thanks so much for ordering from us! I went ahead and looked up your order, and I confirmed that you are talking about the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118534. This wiring harness require a connection to…

view full answer...

Answer 7

Since you already have the factory 7-way, you only need the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #C55384. This will install right behind your 7-way to give you the 4-way plug you need for…

view full answer...

Answer 8

I was able to find some dimensions of your Lance 825 Truck Camper, and since it is 16'3" and 8' tall I recommend the Adco SFS AquaShed Truck Camper Cover #290-12264 as it measures 17-3/4' long x 8-11/16' wide x 8-11/16' tall…

view full answer...

Answer 9

I checked with Redarc and a few other brake controller manufacturers and they state that your 2024 Mercedes Sprinter 3500XD does not have an OEM brake controller install port under the dash like previous models so you would have to hardwire in the…

view full answer...

Answer 10

So you have added a 7-Way trailer connector to your truck and now you want to add one to the trailer. There are a couple of options that you could employ. First, you could just use a 7-Way trailer connector only such as #PK12706, no wiring, and…

view full answer...

Answer 11

When using a 7 pole test such as 7 Way Trailer Connector Vehicle Tester #PK12741, you plug it into the vehicle's 7 way and test each function on the vehicle and the corresponding LED's should illuminate. The RT, TM, and LT you are seeing are…

view full answer...

Answer 12

The PA66-MD40 is a standard 7-way which we have diagrams for. I attached a picture that shows how a standard RV 7-way gets wired up for you to check out.

view full answer...

Replacement for Pollak PA66-MD40 Connector

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching