Availability of Replacement Lid for MaxxFan 4751KS

Question

Question:

I have a Maxxfan - White Model 4751KS and looking to purchase a new lid, Maxxair part 12-00056. Does etrailer make a replacement lid?

asked by: Ray C

1

Helpful Expert Reply:

The correct replacement lid/dome for a MaxxFan* 4751KS is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part # MA10A40009K for black or part # MA10A40002K for white.

expert reply by: Jameson C

1

Answer 1

For a MaxxAir 4751KS you'll want the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - White #MA76JR or if you meant the lid you'd want the part #MA10A40002K.

view full answer...

Answer 2

The correct replacement lid/dome for a MaxxFan* 4751KS is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K for black or part #MA10A40002K for white.

view full answer...

Answer 3

To remove the hinge pin you'll need to remove the Phillips screw from each side of the cover. Then the lift arm supports can be disconnected from the lid, and the new lid can be put in place. You just want to make sure to replace all the hardware…

view full answer...

Answer 4

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 5

For your MaxxAir 4951KS the correct replacement lid is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K (smoke) or part #MA10A40002K (white). The shape of the lid is slightly less rounded as your current lid but it will…

view full answer...

Answer 6

If you remove the screen on your vent assembly there should be both a brand and model number listed. If you can provide this then I can give you the correct replacement lid. If not your only other option would be to remove the vent lid you have now…

view full answer...

Answer 7

The correct replacement lid for a MaxxAir MaxxFan Plus 4951K/4951KS is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K for smoke or part #MA10A40002K for white.

view full answer...

Answer 8

The MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke #MA00A04401K can have the cover replaced with a white one using #MA10A40002K. This is the closest option to clear. If you want a powered lift you can alternatively use the MaxxAir…

view full answer...

Answer 9

You can replace the vent cover on your Maxxair 4700K with the MaxxAir UniMaxx Universal Replacement Lid #MA00-335002 (black) or #MA00-335001 (white). This is a universal fit lid and includes a universal hinge and all necessary hardware.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Availability of Replacement Lid for MaxxFan 4751KS

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching