Search: 4751ks   >  

Based on what you mentioned the correct replacement circuit board would be the part #MA10A04751KS.

I really appreciate all the information as well as the photos. After doing some research, I found that the exact replacement for your Kwikee steps with model number 903206000 are indeed the Kwikee 32 Series Electric RV Double Steps #LC372261. I also…

I reached out to my contact at MaxxAir and she said that the correct printed circuit board for your MaxxAir model 4751KSV05 powered vent fan is the part #MA10A04751KS.

We have a white MaxxFan vent roof with power lift and fan with the part #MA00-04751KSX which also does not have a ceiling garnish.

You will need to test the wiring to determine if the Lift Motor #MA10-20270 is getting power when you press the remote. This will help you determine if the motor is bad or the Printed Circuit Board #MA10A04751KS on your MaxxAir fan. A Test Light…

Yes, you can use the Valley 7054 5th Wheel Hitch on your 2018 Ford F-150. There won't be any issues with the aluminum bed. In order to do so you will need an install kit for which I recommend using the Reese Quick-Install Custom Installation Kit…

The switch on your wall is only turning the power on and off for the fan. With a powered lift there wouldn't really be a way to tap into the function and wire it to a switch to make it easier to access. The only option would be to replace the…

Hello Janice, it sounds like you are having problems with the lift motor on your Maxxfan 4751KS. It is not unheard of for the motors to go bad, and based on the issues you are describing, I believe your motor needs to be replaced. The correct…

The Greystone F2625 was replaced with the Greystone 26" Electric Fireplace with Crystals #324-000069. If you want that exact F2625 model then you'll need to look for a place that sells older fireplaces, otherwise this is your next best…

Sounds like the circuit board of your MaxxAir 8751K is shorted out and would need to be replaced with the part #MA10A04751KS. If that doesn't fix it the solution would be a new lift motor with the part #MA10-20270.

The correct Replacement Operator Mechanism for your model 4751KS MaxxAir MaxxFan is part #MA10-20281K-1AF. If your fan lid is unable to open even manually, then this is the part you need to replace. The other part you referenced, #MA10A04751KS would…

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…