How Tall Of A Rolled Lip Fits Blaylock EZ Lock Trailer Coupler Lock # BLTL-34 For 2-5/16" Couplers

Question

Question:

What is the gap-size? I need to know if it will slide into my coupler since i have a rolled lip

asked by: Cedric B

0

Expert Reply:

The Blaylock EZ Lock Trailer Coupler Lock # BLTL-34 will fit on a 2-5/16" coupler with a maximum lip height of 1-1/16" and width of 4-1/2".

expert reply by: Bud M

0

Rolled Lip Coupler
(click to enlarge)

Answer 1

Thank you for sending the photo! While I have a solution for you, the Blaylock Total-Encasement Coupler Lock, part #BLTL-23 will not work. I is designed to fit Bulldog Collar-Lok style couplers that use a 2-5/16" ball, like #BD028463 for…

view full answer...

Answer 2

The Blaylock EZ Lock Trailer Coupler Lock #BLTL-34 is what I would recommend. For a couple reasons, it is larger and has less areas that could be pried on by a thief to get it off than most locks. I attached a review video for you to check out as…

view full answer...

Answer 3

I did a little research on RAM couplers. From what I saw, the Master Lock Universal Trailer Coupler Lock, #379DAT, will fit the standard coupler type with a 2-5/16 inch ball size or the collar lock type that is more pointed at the end. If your…

view full answer...

Answer 4

Hey Greg! Where did your Stromberg Carlson Base Pad Extreme #SC53VR crack? The Andersen Trailer Jack Block #AN39VR is a good alternative. It has the same 6,000 lb capacity and the design is a little more basic/straightforward which makes it less…

view full answer...

Answer 5

Hey Deb! That 6" maximum trailer frame height is pretty important because of the brackets and how they attach to your trailer. What that measurement is referring to is how tall your trailer's tongue is. I have attached a diagram below to…

view full answer...

Answer 6

Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?

view full answer...

Answer 7

Since you have 8k Dexter torsion axles the correct kit you'd need to convert the axle to disc brakes would be the Kodiak kit part #K2HR858DD. This comes with the correct rated hub and rotor kit that fits the spindle you have on your trailer. I…

view full answer...

Answer 8

The maximum coupler lip thickness the Blaylock EZ Lock Trailer Coupler Lock #BLTL-36 will fit is 3/8 inches. From the picture you sent in it would appear it wouldn't work. Instead the Fastway Coupler Lock part #DT25013 would be a great option…

view full answer...

Answer 9

I am sorry Larry we do not. Unfortunately Tow Ready, the company that makes Gorilla Guard locks, does not offer replacement keys. You can check with your local locksmith and see if they have an alternative solution for you. The only thing I am able…

view full answer...

Answer 10

There are only 3 real possibilities for your lockout failing to work properly on the #DX29FR. The first would be the power. Since it sounds like you are getting 12V power to the solenoid it doesn't sound like this is the issue. The second would…

view full answer...

Answer 11

Additional keys by themselves are not available for the Blaylock EZ Lock Trailer Coupler Lock #BLTL-34. It is possible to order more than one of these locks keyed the same by choosing the keyed alike option from the drop down menu. But as far as keys…

view full answer...

How Tall Of A Rolled Lip Fits Blaylock EZ Lock Trailer Coupler Lock # BLTL-34 For 2-5/16" Couplers

Product Page this Question was Asked From

Continue Researching