Recommended Hitch Pin Lock For A Reese Outfitter Adventure System Bike Rack

Question

Question:

Hello, I have a Reese Outfitter Adventure System, manufacture date unknown, that holds four bicycles. I need a hitch pin for the rack. Do you know what part I need? I also would like a lock for the pin. Thanks for your time!

asked by: Jeff L

0

Expert Reply:

From what I can find the Reese Outfitter Adventure System Bike Rack can take a standard hitch pin lock so you can use the etrailer Hitch Pin Lock # e98879 if you have a 1-1/4" receiver or the etrailer Hitch Pin Lock # e98880 if you have a 2" receiver.

expert reply by: Kevin C

0

Answer 1

Hello Paul, thanks for reaching out. The etrailer Class 3 Hitch #e98902 has a standard 5/8" hitch pin hole. Any hitch pin for a 2" hitch should be this same 5/8" diameter. That diameter is very common. A hitch pin such as part #e98881…

view full answer...

Answer 2

We can get you set up with the trailer hitch receiver, wiring harness and brake controller you need for your 2018 Mazda CX-5, starting with the hitch, and for that I recommend the Draw-Tite Trailer Hitch Receiver #76138. I prefer the Draw-Tite over…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

Hello Charles, Great question. The only difference between the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e25TR, and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR is the…

view full answer...

Answer 9

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 10

That's a great question Richard and thanks for the kind words! It's an error that I'll get someone to check on. Our etrailer Hitch item #e98902 is going to have the same installation process and difficulty as the Curt item #C13315.…

view full answer...

Answer 11

Hey Didi, the MFG part number for the Dometic Penguin II #DMC36ZR is 9105304180. That MFG number you provided looks like it comes back to a Dometic Penguin II as well, so you can use the Dometic Penguin II #DMC36ZR as a replacement. If there is…

view full answer...

Recommended Hitch Pin Lock For A Reese Outfitter Adventure System Bike Rack

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching