Air Fitting for Top of Air Bag of Firestone Ride Rite Kit F2410

Question

Question:

Is this the replacement air fitting for the ride rite kit made for the 2005-2023 Tacoma. My kit came with a fitting too large. I believe it’s kit F2410

asked by: Kahen R

0

Expert Reply:

For the Firestone Ride Rite kit part # F2410 the correct elbow connector fitting is the part # F3031-1 which I confirmed with Firestone.

expert reply by: Jameson C

0

Answer 1

Hello Norm. I can definitely point you in the right direction of new leaf springs for your 2018 Montana 5th wheel. Leaf springs are not custom fitted though, so there is no way to know what size spring you need just by looking at the model of RV.…

view full answer...

Answer 2

Hey Darrel, we actually have exactly what you are looking for with the part #TRU52FR which is for a 7k axle and is 25-1/4 inch from eye to eye. This is also a 6 leaf spring as well. The spring you referenced would be too short.

view full answer...

Answer 3

Hey Joseph, it sounds like your leaf springs have worn out and would need to be replaced...but since you are wanting a spring that's a bit more heavy duty I would recommend going with the part #TRU52FR as this is rated for 7k axles and is the…

view full answer...

Answer 4

Hello Mike, Great question! You can tell your toy hauler trailer's leaf springs are worn out by looking for several visual and performance-related signs. Visually, worn springs may appear flat or even bowed downward, rather than having their…

view full answer...

Answer 5

We actually have the Replacement ECU Service Pack #F69VV which is designed to replace the F3 controller. This way you will not have to replace your harness and only need to replace the ECU.

view full answer...

Answer 6

Thanks for reaching out, Matt! The Replacement ECU Service Pack #F69VV is for single-path applications. Since you have a dual-path kit you'll need the Replacement Dual-Path ECU Service Pack #F58VV instead. This is designed for the newer F4 kits…

view full answer...

Answer 7

Hey Dustin, thanks for reaching out! To replace the ECU on your Air Command F3 you need the part #F69VV for a single path but or the part #F58VV for a dual path system. Before you do that, have you tried the bubbly water test to see if you have any…

view full answer...

Answer 8

Yes, we have both the Firestone Elbow Connector for 1/4" Tubing #F3031-1 and the Firestone Inflation Valve for 1/4" Tubing #F3032-1 should you need to replace that as well. Both of these fittings are used in the Firestone 2560.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Air Fitting for Top of Air Bag of Firestone Ride Rite Kit F2410

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching