Recommended Hitch for a 2022 Toyota Camry SE

Question

Question:

Hello, I am looking for a hitch for my 2022 Toyota Camry SE. I saw that there’s a draw-tight class 1 and 2. I want to see if class 1 fits on mine because I only see trim XSEV6 vehicles with it only. If not so I can continue to buy class 2 instead.

asked by: Manuel H

0

Expert Reply:

The Curt Trailer Hitch item # C11576 does fit your 2022 Toyota Camry SE. It fits all models of the 2022 Camry. This is a class I hitch with a 1-1/4" receiver.

I have linked an installation video below.

If you are planning on towing you will also need a wiring harness item # 118763 and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.

expert reply by: Jerred H

0

Answer 1

There is one hitch available for the 2024 Toyota Camry XSE that is really well hidden. It is the Curt item #C11576. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class I hitch with a 1-1/4" receiver. It has…

view full answer...

Answer 2

When installing Curt trailer hitch #C11576 you will need to remove the tie down bracket from passenger side frame rail, trim a 4.25" x 2" portion from the heat shield and trim a 4.75" x 10.0" portion from the underbody panel. I…

view full answer...

Answer 3

To add a hitch to your 2023 Toyota Camry, I recommend the Curt Trailer Hitch item #C11576. This hitch is custom fit and bolts to your Camry with included hardware. This hitch is confirmed to fit all models of the 2023 Camry including the hybrid. This…

view full answer...

Answer 4

Hey Robert. The EcoHitch Hidden Trailer Hitch item #EH77CR will fit the hybrid model of the 2025 Toyota Camry. This hitch has a 2" receiver, a 350 lbs tongue weight, and a 2,000 lbs towing capacity. There are no 2" hitches that fit a 2024…

view full answer...

Answer 5

For your 2019 Toyota Camry SE Sport the best hitch option is the Curt #C11576 as it is the most hidden option available since only the hitch opening hangs below the rear bumper. For trailer wiring then you'd want the part #118763 for the most…

view full answer...

Answer 6

Hey Casey, the highest tongue weight rated hitch we carry for your 2021 Toyota Camry is the Draw Tite part #36643 which has a tongue weight rating of 350 lbs. Then for trailer wiring the best option is the Tekonsha part #118763 which installs easily…

view full answer...

Answer 7

Hey Len, the RockyMounts HighNoon FC Bike Rack for 2 Bikes #RKY77RR you were looking at could work with both a class I and II hitch (as long as the class II hitch doesn't have a 2" receiver), and the RockyMounts HighNoon FC Bike Rack for 2…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hey Frank! This is a newer product, so there aren't many long-term owner reviews available yet. That said, we have done extensive testing on the Benton MoveHitch #B86VR. A strain gauge was used to measure the forces the carrier experiences during…

view full answer...

Recommended Hitch for a 2022 Toyota Camry SE

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching