Will Installing A Hitch On The Toyota Camry SE Affect Lower Body Molding

Question

Question:

Hello, I am trying to find out which hitch would be best on a 2018 Camry SE or Sport model. It has lower body molding that is part of the rear bumper. looks more like the lexus It also sits a little lower than the regular camry. I am also wondering if you have a picture of any so I can see how it will look.

asked by: Thomas P

0

Expert Reply:

When installing Curt trailer hitch # C11576 you will need to remove the tie down bracket from passenger side frame rail, trim a 4.25" x 2" portion from the heat shield and trim a 4.75" x 10.0" portion from the underbody panel.

I attached pictures of the trailer hitch so you can see how it looks. There are also pictures of the hitches installed on the Camry in the attached instruction manuals (see attached). No trimming or cutting will have to be done to the body of the Camry, all trimming and cutting is done under the body, therefore leaving the outside appearance of the car intact.

expert reply by: Timothy G

0

click to enlarge

Answer 1

To add a hitch to your 2023 Toyota Camry, I recommend the Curt Trailer Hitch item #C11576. This hitch is custom fit and bolts to your Camry with included hardware. This hitch is confirmed to fit all models of the 2023 Camry including the hybrid. This…

view full answer...

Answer 2

Hey Robert. The EcoHitch Hidden Trailer Hitch item #EH77CR will fit the hybrid model of the 2025 Toyota Camry. This hitch has a 2" receiver, a 350 lbs tongue weight, and a 2,000 lbs towing capacity. There are no 2" hitches that fit a 2024…

view full answer...

Answer 3

For your 2019 Toyota Camry SE Sport the best hitch option is the Curt #C11576 as it is the most hidden option available since only the hitch opening hangs below the rear bumper. For trailer wiring then you'd want the part #118763 for the most…

view full answer...

Answer 4

The Curt Class II hitch part #C11576 is a confirmed fit for the 2019 Toyota Camry Hybrid models like what you have. We checked with Curt to verify this as a fit. You'll want to check your owners manual for any towing related…

view full answer...

Answer 5

There is one hitch available for the 2024 Toyota Camry XSE that is really well hidden. It is the Curt item #C11576. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class I hitch with a 1-1/4" receiver. It has…

view full answer...

Answer 6

While the Curt Trailer Hitch Receiver #C11576 you were looking at is confirmed to fit all models of the 2021 Toyota Camry including your 2021 Toyota Camry TRD, you may have to trim the middle section of the lower bumper if it sticks down any further…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Will Installing A Hitch On The Toyota Camry SE Affect Lower Body Molding

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching