Comparing Receiver Heights For Draw-Tite Receivers # 76112 and # 75237

Question

Question:

Good Morning, Wondering if there is any information 76112 and 75237 and comparing ground clearance on a 2017 Toyota Sienna or really any vehicle. If that is not available, could the product height difference from the mounting bracket be provided? There are comparable images but looking for hard numbers. Thanks

asked by: Jared K

0

Expert Reply:

We were able to install both the Draw-Tite Receivers # 76112 & # 75237 on a 2017 Toyota Sienna in our shop. Both receivers were fitted to the same vehicle and we found the Receiver # 76112 to have a receiver height of 12" while the Receiver # 75237 to have a receiver height of 11-1/2". So the Receiver # 76112 will give you the best ground clearance and you will not have the visible cross tube which also hangs down across your Sienna.

expert reply by: Bud M

0

Answer 1

We have a Draw Tite hitch #76112 that fits your 2011 Toyota Sienna and would be a really great option as it has plenty of towing capacity and is mostly hidden but the part number you mentioned does not fit your Sienna. I attached a picture of the…

view full answer...

Answer 2

The best hitch we offer is the Curt #C13343 which is a Class III which means it has a 2 inch opening (most popular hitch size for accessories like bike racks) has plenty of capacity, and is mostly hidden when installed since only the hitch opening…

view full answer...

Answer 3

The main differentiation between the available Class III hitches is how they'll appear once installed. The etrailer brand #e98837 and the Draw-Tite #75237 will have the entire hitch visible under the rear bumper. In contrast, the Draw-Tite #76112…

view full answer...

Answer 4

The etrailer.com Trailer Hitch Receiver part #e98853 is a great choice for the 2020 Toyota Sienna but it does require some under body trimming during installation like you mentioned. The under body panel will need to have a 4" by 7"…

view full answer...

Answer 5

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Answer 6

Hey good question, Scott. The etrailer Class 3 Round Tube Hitch #e98837 is compatible with a weight distribution (WD) system because the receiver is welded directly to the crosstube. This allows the hitch to withstand the additional stress added by a…

view full answer...

Answer 7

You are correct that both the #e98853 and the #e98837 will both fit your 2018 Toyota Sienna L. There are a few noteworthy differences. One difference is that with the #e98853 the crosstube will be concealed behind the bumper. The crosstube on the…

view full answer...

Answer 8

This is a great question and I can definitely understand being a bit overwhelmed trying to work through all the available hitch options for your vehicle. Just to cut right to it I specifically recommend the Curt Class III Trailer Hitch #C13343 for…

view full answer...

Answer 9

Although it makes it much easier to install the hitch when the vehicle is lifted, it can be done with your 2015 Sienna on ramps as you said. It just may be a little cramped. You want to make sure your Sienna wheels are chocked and you have the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Comparing Receiver Heights For Draw-Tite Receivers # 76112 and # 75237

Continue Researching