Draw Tite Trailer Hitch Recommendation for 2011 Toyota Sienna

Question

Question:

Does this hitch fit to 2011 Toyota Sienna?

asked by: Henry

0

Expert Reply:

We have a Draw Tite hitch # 76112 that fits your 2011 Toyota Sienna and would be a really great option as it has plenty of towing capacity and is mostly hidden but the part number you mentioned does not fit your Sienna.

I attached a picture of the hitch installed as well as a link to an install video for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We were able to install both the Draw-Tite Receivers #76112 & #75237 on a 2017 Toyota Sienna in our shop. Both receivers were fitted to the same vehicle and we found the Receiver #76112 to have a receiver height of 12" while the Receiver…

view full answer...

Answer 2

We have a solution for you either way but the Hollywood Racks Sport Rider SE Bike Rack #HLY84FR may or may not work with your particular step through bikes. There are different styles of step through bikes and depending on how low the step through…

view full answer...

Answer 3

The trailer hitch I recommend for your 2019 Toyota Sienna is the Draw-Tite Trailer Hitch #76112 because if you plan on towing, this hitch is rated for weight distribution and the similar hitches are not. When we test fit the Draw-Tite Hitch #76112,…

view full answer...

Answer 4

The reason the part #76112 takes longer to install than the other hitches that fit your 2017 Toyota Sienna is that it installs higher than the other hitches and only has a visible hitch opening where the other hitches hang down further below. I…

view full answer...

Answer 5

For your 2015 Toyota Sienna the Draw Tite hitch part #76112 would be your best option since you want the hitch that sticks out to the rear of the vehicle the most. I attached a picture for you to check out to see what I mean.

view full answer...

Answer 6

That's a good question and there is one significant difference between all the trailer hitches that fit your 2020 Toyota Sienna, which is the visibility of the crosstube. The best, most high-quality trailer hitches are from Draw-Tite, so we will…

view full answer...

Answer 7

Yes, the Yakima FullBack 3 Bike Rack #Y02633 is confirmed to fit your 2017 Chevy Volt. According to Yakima you will use the Hub Setting 2 and locate the base pad 1/4" up from the bumper. Please note to use an Adapter Bar #Y02531 if you're…

view full answer...

Answer 8

That all depends on the style of bike you're going to be using. The Hollywood Racks Destination Bike Rack for 2 Bikes item #HLY94FR you were looking at is a great option for bikes with alternative frames and fenders. It uses padded cradles with…

view full answer...

Answer 9

For a '13 C-Max the only 2 inch hitch available is the EcoHitch #306-X7200; there is also trailer hitch with a 1-1/4 inch receiver for a 2013 C-Max, the Class II Curt #C12092. So if you have the Class II Curt #C12092 trailer hitch on your vehicle…

view full answer...

Answer 10

I can tell by the frame cradles in the picture of your Yakima Ridgeback 4 #Y02458 that your bike was made after 2016 so that means the correct 2 inch adapter with wedge is the part #8880612.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Draw Tite Trailer Hitch Recommendation for 2011 Toyota Sienna

Featured Help Information

Miscellaneous Media

Continue Researching