Recommended Roof Vent that Can Be Installed Above a Shower

Question

Question:

Im looking for a MaxxFan by MaxxAir that I can install above a shower. The three MaxxFan products all contain the disclaimer Note: Not for use directly above tubs, showers, or range cooking surfaces. Is there something that can be done to accommodate an above-the-shower installation? Or, failing that, is there a MaxxAir product you carry that will work in that situation?

asked by: Brian W

0

Expert Reply:

You technically can use a powered roof vent like the MaxxFan Deluxe Roof Vent # MA00-06401K however it is not recommended because the moisture can ruin the electronics.

So for above your shower, I recommend going with a manual roof vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-28.

This will do the same thing as the MaxxFan Deluxe Roof vent but is manually operated instead of powered.

expert reply by: Bryce D

0

Chris

9/6/2024

The problem with that solution is that shorter folks can't reach the knob to open the vent.

Bryce D.

9/9/2024

@Chris Yeah I can see that being an issue. You could also use the Ultra-Fab Solar-Powered Plumbing Vent for Motor Homes # UF53-945001 which is solar powered so it doesn't actually get wired in, and will function the same as any other powered roof vent.

Helpful Links

tv-install-ultra-fab-solar-powered-motor-home-rv-plumbing-vent-2005-k-z-new-vision-uf53-945001.aspx

Chris

9/9/2024

@BryceD I have power at the bathroom vent that I want to replace. Maxxair has one withe a hardwired remote, but they don't sell it as an aftermarket item I would fish the control wire in the wall and ceiling, rather than have a wireless remote that gets lost. I live on the Oregon/Washington border, so the integrated cover is a must. Had one that had the rain sensor, could not keep it open here in the winter.

Bryce D.

9/10/2024

@Chris Chris, unfortunately there aren't any roof vents that have an option to add a wall switch. They either have the controls on the fan which wouldn't work because of how high you'd need to reach, or they have them with the small wireless remotes.

Answer 1

Yes, you could splice into the wiring of the 12v light to power your MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat - Manual Lift - 10 Speed - Smoke #MA00-06200K. Since the light you have on the ceiling has a switch on it the power wire is always…

view full answer...

Answer 2

The Leveling Scissor Jack Set, item #JSC-24, is designed as a leveling, stabilizer jack, that is to be bolted to the frame of the trailer. If you could find a location close enough to the wheel and tire to mount the jack securely, then the 5,000…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 6

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 8

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 9

Hey Victor, yes the Long U-Bolt Kit part #RM33KT is a Roadmaster brand u-bolt kit. This does include nuts and washers as well.

view full answer...

Answer 10

Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…

view full answer...

Answer 11

Hey Eric. Axle spacing isn't the best way to determine what replacement equalizers you need. The most accurate way to find a replacement is to match up a replacing equalizer as close as possible to the dimensions of the one currently on your…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Recommended Roof Vent that Can Be Installed Above a Shower

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching