Will the Rhino-Rack Roof Rack Work with Factory Tracks Spaced 45 Apart?

Question

Question:

my track system on my leer camper shell are 45in apart 2023 Toyota Tundra will the 54in bar system work or do I need to go longer bar thank you.

asked by: Nelson H

0

Expert Reply:

The Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars # Y02-480B-NT will work just fine with your LEER camper shell with 45" tracks.

Since you already have tracks on your camper shell you'd just need to attach the feet and you'll be set.

expert reply by: Bryce D

0

Answer 1

Yes, the Rhino-Rack Heavy-Duty Roof Rack Crossbars are offered in lengths up to 71" using part #RB1800B-2. In order to use these with Yakima or Thule tracks you'll also need the Rhino-Rack Quick Mount Legs part #RRRLT600, Roof Rack Leg…

view full answer...

Answer 2

The Rhino-Rack #Y01-140B-NT would be perfect. The kit includes 2 Rhino-Rack heavy duty crossbars, roof rack feet and the hardware necessary to attach the roof rack legs to the existing tracks on your ARE bed topper. The roof rack will have a 220 lb…

view full answer...

Answer 3

Hey Zach, Rhino-Rack crossbars have an 11-3/4" mounting track on the both sides of the bottom of the crossbar. At 65" this would mean that the spacing of the t-slots in your cover would need to sit roughly 55" to 64" apart in…

view full answer...

Answer 4

Ok Sean, so I was able to track down some info about your LEER camper shell and it looks like you ordered it with the Thule tracks already installed. So, if that's the case, you can then use either the Thule Tracker II feet with the Thule WingBar…

view full answer...

Answer 5

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 6

The Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells 59" #Y01-130B that you were looking at include the tracks, crossbars, and legs. This system needs to be drilled into a camper shell. Since you already have the Thule tracks, you can…

view full answer...

Answer 7

The Thule DockGrip Kayak and SUP Carrier with Tie-Downs part #TH895 is perfectly compatible with the Yakima JetStream Crossbars like part #Y00426. Like you said T-track and T-slot and the other track mounted accessories are interchangeable among the…

view full answer...

Answer 8

The A.R.E. topper on your 2020 Toyota Tacoma is outfitted with Yakima tracks. As such, the best thing to use is a rack system designed for Yakima tracks. I recommend the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars, part #RRRLT600, along…

view full answer...

Answer 9

The Batwing and Foxwing Hardware Kit for Rhino-Rack Heavy-Duty Crossbars item #RR33101 is what you need for the Rhino-Rack Roof Rack for Thule and Yakima Tracks item #Y01-140B-NT you were looking at. These will fit in the tracks of the heavy duty…

view full answer...

Answer 10

There are end caps on the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars #Y01-140B-NT that are tapered but the actual bar itself is not tapered so if you really wanted to cut them shorter you certainly could.

view full answer...

Answer 11

Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part #RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will the Rhino-Rack Roof Rack Work with Factory Tracks Spaced 45 Apart?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching