Roof Rack Recommendation for 2019 Chevy Silverado with ARE Topper

Question

Question:

What roof rack do you recommend for a ARE Z topper on a 2019 Chevrolet 2500HD Crew Cab with 78.” Bed?

asked by: Ashley

0

Expert Reply:

The Rhino-Rack # Y01-140B-NT would be perfect. The kit includes 2 Rhino-Rack heavy duty crossbars, roof rack feet and the hardware necessary to attach the roof rack legs to the existing tracks on your ARE bed topper. The roof rack will have a 220 lb capacity once installed

expert reply by: Jameson C

0

Answer 1

Ok Sean, so I was able to track down some info about your LEER camper shell and it looks like you ordered it with the Thule tracks already installed. So, if that's the case, you can then use either the Thule Tracker II feet with the Thule WingBar…

view full answer...

Answer 2

The Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars #Y02-480B-NT will work just fine with your LEER camper shell with 45" tracks. Since you already have tracks on your camper shell you'd just need to attach the feet and…

view full answer...

Answer 3

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 4

Hey Zach, Rhino-Rack crossbars have an 11-3/4" mounting track on the both sides of the bottom of the crossbar. At 65" this would mean that the spacing of the t-slots in your cover would need to sit roughly 55" to 64" apart in…

view full answer...

Answer 5

The Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells 59" #Y01-130B that you were looking at include the tracks, crossbars, and legs. This system needs to be drilled into a camper shell. Since you already have the Thule tracks, you can…

view full answer...

Answer 6

Yes, the Rhino-Rack Heavy-Duty Roof Rack Crossbars are offered in lengths up to 71" using part #RB1800B-2. In order to use these with Yakima or Thule tracks you'll also need the Rhino-Rack Quick Mount Legs part #RRRLT600, Roof Rack Leg…

view full answer...

Answer 7

The Thule DockGrip Kayak and SUP Carrier with Tie-Downs part #TH895 is perfectly compatible with the Yakima JetStream Crossbars like part #Y00426. Like you said T-track and T-slot and the other track mounted accessories are interchangeable among the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Roof Rack Recommendation for 2019 Chevy Silverado with ARE Topper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching