Hubcap For 16 Inch Dexstar Conventional Steel Wheel AM20758

Question

Question:

In January I bought four AM20758 Dexstar Conventional Steel Wheel - 16 x 6 Rim - 6 on 5-1/2 - Black Powder Coat wheels. Now Im wondering which of your hub caps fit the wheels? Thanks for helping me shop.

asked by: Loren S

0

Expert Reply:

Appreciate the purchase, and there is a hubcap option that fits the Dexstar Conventional Steel Wheel - 16" x 6" Rim - 6 on 5-1/2 - Black Powder Coat # AM20758:

- Phoenix USA Baby Moon Hubcap - Stainless Steel # PX1309SS

expert reply by: Kyle S

0

Answer 1

You can determine whether either of our baby moon hubcaps, part #AM90086 or part #AM981306, will fit a wheel by measuring the outer diameter of the inner ring and then the outer diameter of the inner ring with one of the tabs (see attached photo).…

view full answer...

Answer 2

The Dexstar Conventional Steel Wheel part #AM20504 is primarily designed for trailers but if the offset (+0.5"), bolt pattern (5 on 4-1/2"), dimensions (15" diameter x 6" wide), and capacity (1,820 lbs) will work with your vehicle…

view full answer...

Answer 3

The Dexstar Conventional Steel Wheel #AM20514 you found is designed to use a Baby Moon Hubcap #PX1307SS. This style wheel does not accept a traditional Wheel Center Cap #LHCS108-SI60C. To use this style cap I recommend the Vesper Steel Modular…

view full answer...

Answer 4

Thanks for the picture and info on your current brake assemblies, from that we know that the Dexter brake assembly part #23-106 that you referenced is the correct fit. For the left hand side you'd then want the part #23-105.

view full answer...

Answer 5

Typically, trailer wheels will not work on a vehicle but if you have a 6 on 5-1/2 bolt pattern on your hub and need 16 inch wheels then the #AM20758 may work great for you. Another thing to make sure of is if you have an offset on your wheels. The…

view full answer...

Answer 6

We do have an option for replacing your Elixir ELX-60. Unfortunately there is not going to be a direct replacement for the converter section. You will need to replace the entire panel with the Progressive Dynamics 4500 Series RV Converter…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Hubcap For 16 Inch Dexstar Conventional Steel Wheel AM20758

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching