Correct Bearing Buddy Seal for CMC-PC190H20 Trailer
Updated 05/19/2023 | Published 05/18/2023
Products Featured in This Question
Question:
hi.. looking for a Bearing Buddy for my CMC-PC190H20 Trailer thank you
asked by: Mike Z
Expert Reply:
The correct Bearing Buddy seal set can be found by identifying your inner bearing and grease seal on your CMC-PC190H20 trailer. I have no way of knowing what bearings and seals are on your trailer so you will need to identify them.
You can get the information off of the axle tag and find out what bearings and seals it uses from the axle manufacturer. If this information is missing, you will have to take the hubs off and either find the part number or measure using a digital caliper like the # PTW80157.
The # BB60011 you were looking at works with a # 25580 inner bearing and the outer diameter of the grease seal is 3.370". Assuming this matches up with what you have on your trailer this would be the correct kit.
(click to enlarge)
Product Page this Question was Asked From
Spindle Grease Seal Set for 25580 Inner Bearing and 2.441 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.38 Inch I.D.
- 3.37 Inch O.D.
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 2717ss
- Search Results: spindle grease seal
- Search Results: surge brake
- Search Results: trailer leaf springs
- Search Results: leaf spring
- Search Results: spindle washer
- Shop: Spindle Grease Seal Set for 25580 Inner Bearing and 2.441 Bearing Buddy
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Shop: Bearing Buddy Bearing Protectors - Model 2717A-SS w/ Auto Check - Stainless Steel (Pair)
- Q&A: How to Measure to Determine the Correct Grease Seal on a Trailer Hub
- Q&A: Does Trailer Spindle Not Have Torque Spec
- Q&A: Grease Cap for a Concrete Mixer with Inner Diameter of 2.375
- Video: The Low-Down on the Replacement Damper for Model 20 Actuator
- Video: All About the Dexter Brake Actuator
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Video: Let’s Check Out the Washer Spindle Tongue
- Q&A: Spindle Washer Compatibility With 1 Inch Spindle Without D-Shape
- Shop: Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 20,000 lbs
- Shop: Bearing Buddy Bearing Protectors - Model 2717SS - Stainless Steel (Pair)
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Shop: Dexter Adjustable-Channel Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 14,000 lbs
- Q&A: Wiring Diagram for 7-Way Round Pin Trailer and Vehicle Side Connectors
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Torque Specification for Lugs Nuts on 5/8-Inch Stud on Dexter Hub
- Article: Most Popular Wheel Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams