Replacement Hardware and Brackets for a 2018 Ford F-150 with Westin HDX Grille Guard

Question

Question:

What would be the correct replacement mounting hardware for a weston HDX grill gaurd for a 2018 ford F150.non raptor, 5.0 v8 xlt

asked by: Wayne S

0

Expert Reply:

The correct replacement hardware and brackets for a 2018 Ford F-150 with Westin HDX Grille Guard is the Replacement Mounting Brackets and Hardware for Westin HDX Grille Guard with Punch Plate part # 57-383PK.

expert reply by: Conner L

0

Answer 1

It sounds like you are looking for replacement hardware for the Westin HDX Grille Guard for your 2019 Ford F-150. If you have the #57-3835 or #57-3830 the correct mounting hardware is the #57-383PK. You will need to confirm that this is the model you…

view full answer...

Answer 2

I contacted Westin and though the picture does just show one of the brackets, the #57-383PK Replacement Mounting Brackets and Hardware Kit does include both options. So it will have the bracket for a 2015 to 2017 F-150 and the brackets for a 2018 to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Replacement Hardware and Brackets for a 2018 Ford F-150 with Westin HDX Grille Guard

Product Page this Question was Asked From

Continue Researching