Where to Mount Flat Tow Wiring Connector and Breakaway Switch on 2022 Ford Expedition

Question

Question:

Where is the best mounting location for flat tow wiring and breakaway switch on a ‘22 Ford Expedition? Is it ok to mount them to the lower bumper skirt by drilling through it and reinforcing with the supplied metal bracket?

asked by: Chad

0

Expert Reply:

I looked up pictures of the front end of your 2022 Ford Expedition and the best place to put the tow bar wiring connector and the breakaway switch would be the the lower front bumper skirt like you mentioned. This is where this has to install on most vehicles.

expert reply by: Jameson C

0

Answer 1

Hey Mark, I checked the install instructions for the Demco base plate kit part #DM56MV that you referenced and it does not require removing the front bumper to complete the install. This also will work directly with your Roadmaster Blackhawk 2 tow…

view full answer...

Answer 2

Hey Carl, we have checked with Curt and they have told us that the Curt Bullseye part #RVI64FR can work with the RVI Brake 3 as long as the serial number is above 35,000. Is that what they told you as well or did they mention the serial number at…

view full answer...

Answer 3

Hey Rick, thanks for reaching out. I see you already got your order placed but I wanted to make sure your question was answered. Yes, you can cut the 4-way plug off the #BLU92HR and wire it to a 6-pin or 7-pin plug. People actually do this all the…

view full answer...

Answer 4

When it comes to adapting your RoadMaster BlackHawk 2 Tow bar #RM-422 to you Demco Classic baseplate I recommend The Adapter for Roadmaster Tow Bars to Demco Classic Base Plates #DM9523036. This adapter will bolt right up with no issues whatsoever…

view full answer...

Answer 5

That is correct, the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar #RM-422 will hook up to your base plates the exact same way your BlackHawk towbar does. This tow bar has a weight capacity of 10,000lbs, features a non-binding design that…

view full answer...

Answer 6

Hey Russell, thanks for reaching out! Sounds like you're needing the etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches #e98881, which has a keyed alike option on the product page and is made in the USA. Just change the option to…

view full answer...

Answer 7

You can install a 7 way connector on your 2019 Ford F-150 by using the Curt T-Connector #C56413, which will plug into the factory supplied 4 way connector plug on your vehicle and give you a fully functioning 7 way connector. If you've got a…

view full answer...

Answer 8

Hello Steven, thanks for reaching out. Yes, the Blue Ox EZ Light Tow Bar Wiring Kit #BLU92HR will work fine on your 2018 Ford F-150 King Ranch With LED taillights.

view full answer...

Answer 9

In order to flat tow a 2019 Ford F-150 you will need a number of components (which I have attached for you below) and this does include a flat-tow wiring harness. The flat-tow wiring harness will take input from the motorhome's lighting signals…

view full answer...

Answer 10

The red wire of the Roadmaster Brake Lite Relay part #RM-88400 that you referenced needs to run to the fuse panel of your tow vehicle to a circuit that is only powered when the vehicle is in the run position.

view full answer...

Answer 11

When installing the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400 in your 2018 Ford f-150 with neutral tow kit, you will want to use Instructions "B" for the installation. Roadmaster states that if you have a Ford vehicle…

view full answer...

Answer 12

Yes you can use 2018 Ford F-150 Brake Lite Relay part #RM-88400 video as a guide for your 2020 Ford F-150. The second set of instructions "normally closed" would be what you'd use since your truck has neutral tow and a push button…

view full answer...

Where to Mount Flat Tow Wiring Connector and Breakaway Switch on 2022 Ford Expedition

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching