Availability of The Peterson Piranha LED Clearance or Side Marker Light In Amber M170A and Red M170R

Question

Question:

Looking for Peterson Piranha M170A and M170R Side Marker Lights. Found the A=Amber but couldnt find R=Red. Hopefully you have Red. Need 2 Red and 2 Amber.

asked by: Keith B

0

Expert Reply:

We do have the Peterson Piranha LED Clearance or Side Marker Light M170R # PET88FR. This is the same as the Amber # M170A you found but with the red lens you are looking for as well.

expert reply by: Bud M

0

Answer 1

Hello John, So the SAE number you gave isn't actually a part number, it's a number that means it met standards by the Society of Automotive Engineers, so there isn't a way for me to identify a lens that way. The best I can offer is a…

view full answer...

Answer 2

The Optronics LED Clearance or Side Marker Light #MCL36AB is not submersible. The Peterson Piranha LED Clearance or Side Marker Light #M170A is going to be the closest light we have to the same dimensions which is going to be submersible.

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

I will start by sating that the wheels/tires on the trailer you are looking at do look kind of undersized. So you definitely can stay with a 13" set up like the Kenda Karrier ST185/80R13 Radial Trailer Tire - Load Range D #AM10208 and Dexstar…

view full answer...

Answer 7

Unless your trailer has dually wheels then you would need to look at just the single tire capacity. On dually wheels the weight isn't exactly always distributed evenly so the lower capacity compensates for that so that no one single tire in the…

view full answer...

Answer 8

Hey Randy, good question. Yes, the TowSmart #TS85SR is 100% copper wire, not copper-clad aluminum. That’s a big deal for trailer wiring because copper carries current better, holds up to vibration, and resists corrosion a lot better over time. You’ll…

view full answer...

Answer 9

I would start by checking location 74 which is the relay for the trailer tow left-hand stop/turn function. Another place to check is location 100 which is the trailer tow turn signal function. You could also check location 70 which is the trailer tow…

view full answer...

Answer 10

You have done a great job troubleshooting the problem so far and have isolated the issue to the truck wiring. I have confirmed with my contact at Tekonsha, and another fuse that you might check would be fuse #6 in the under dash junction box. This is…

view full answer...

Answer 11

For a 3,500 lb hub/drum replacement that will work well to replace your AL-KO 8500 you'd want the hub part #84546UC3-EZ which fits the spindle and has the 5 on 4-1/2 inch bolt pattern you need. For brake assemblies then the Electric Brake…

view full answer...

Answer 12

Hey Eli! The first thing you want to do is make sure you have brake flanges on those axles. You also need to take a look at the axle tags and find the axle capacity. More than likely they're 3,500 lb axles so I'll answer based on that. If you…

view full answer...

Availability of The Peterson Piranha LED Clearance or Side Marker Light In Amber M170A and Red M170R

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching