Replacements For Bearing LM29749 and Race LM29710

Question

Question:

Looking for LM29749 bearing and LM29710 race. Need 8. Also looking for a grease seal OEM # 19762. 2.00 inch I.D. X 2.632 inch O.D. seal. Need 8. Thanks

asked by: L.k.

0

Expert Reply:

While we do have the Bearing LM29749 # 29749 and Race LM29710 # 29710 you are looking for. We do not have a grease seal which fits the dimensions you have.

expert reply by: Bud M

0

Answer 1

Though bearings do not have weight capacities, they do work with axles that have certain weight capacities. Bearing #29749 is often found on 3,000 lb axles; the matching race is #29710.

view full answer...

Answer 2

I have a solution for you. Although that combination of bearings in a hub is not made any more you can keep the old hub and just replace the bearings with Bearing #29749 and race for 29749 Bearing #29710 . Replacement Trailer Hub Bearing - L44643…

view full answer...

Answer 3

I have a replacement axle option for you, but unfortunately there are no hubs available that use bearing combination #29749 and L44640. The best option is going to be replacing the axle with one that uses a more common bearing combination. To do this…

view full answer...

Answer 4

The inner bearing you said you have sounds like it is part #29749. This bearing has a 1.50 inner diameter and 2.563-inch outer diameter. You will need a digital caliper like part #PTW80157 to make sure you get the right replacement parts. To make…

view full answer...

Answer 5

The Complete Agricultural Hub Assembly #AH30660FCOMP is our only hub which uses the Inner Bearing #29749 and Outer Bearing #LM67048. We do have the Spindle #TRU34FR you can install on your axle for this hub if you are unable to find the correct depth…

view full answer...

Answer 6

Thank you for providing a photo of the Toyota 6-lug wheel for which you wish to find a matching trailer axle. You will first want to refer to the linked article on wheel bolt patterns to verify the exact pattern used on your wheel. The article…

view full answer...

Answer 7

I can get you bearings for your current hubs, but we don't have any hubs or seals that will fit your spindles. For inner bearing, you can use #29749 and outer bearing #1779. If you want to upgrade your system, I recommend starting with new axles…

view full answer...

Answer 8

You can get a bearing with a 1-1/2 inch inner diameter here, and there are two options, with different outside diameters: - 1-1/2" Inner Diameter, 3" Outer Diameter: Replacement Trailer Hub Bearing #2788 - 1-1/2" Inner Diameter,…

view full answer...

Answer 9

It sounds like you are looking for the Bearing part #29749 which has a 1.500" inner diameter (I.D.) and a 2.563" outer diameter (O.D.). This is more than likely what you need. It is commonly used on the AH30660F agricultural trailer hub…

view full answer...

Answer 10

Mobile home axles typically don't use standard bearing combinations, or even standard bearings. They are also intended for one time use. The 1.5" ID you have means it could be a #2788 or #29749 bearing, neither of which are used in modern…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacements For Bearing LM29749 and Race LM29710

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching