Solution for Replacement Hub on Mobile Home Axle
Updated 09/06/2023 | Published 09/05/2023
Products Featured in This Question
Question:
Hello im trying to convert a mobile home axle to standard hub but looks like the inner bearing may only be 1.5 inch id does thos make sense if so what h7b kit can be used
asked by: Tim
Expert Reply:
Mobile home axles typically don't use standard bearing combinations, or even standard bearings. They are also intended for one time use. The 1.5" ID you have means it could be a # 2788 or # 29749 bearing, neither of which are used in modern hubs. If you want to trade out the hub the only solution would be to replace the axle.
Finding a replacement axle will require knowing the capacity as well as the hub face to hub face measurement. I'm guessing this is a homemade trailer so you will need to determine what capacity is required since there is likely no way to find the capacity of the mobile home axle.
I have attached a video below which shows how to measure, along with a link to all of our available axles for your reference.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Suspension Enhancement
- Shop: Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle
- Shop: Equalizer for 2-1/2" Wide Slipper Springs - LH or RH - 18-3/8" Long - 1" Center Hole
- Shop: Dexter Trailer Brake Drum for 9,000-lb to 10,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Non-ABS
- Q&A: Determining Correct Replacement Axle For Older Axle W/ LM29749 and L44640 Bearing Combination
- Q&A: Replacement Bearings and Seal for Trailer with LM29749 and L44610 Bearings
- Q&A: How To Determine What Replacement Bearings Are Needed For Trailer
- Q&A: Bearing With 1-1/2 Inch Inner Diameter
- Q&A: Trailer Bearing With 1.500 Inch Inner and 2.561 Inch Outer Diameter
- Q&A: Bearing Kit And Hubs For Old Motorhome Axles
- Q&A: Replacement Bearings And Seals For 6 on 5.5 Hub.
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: LM29749 Bearing for Agricultural Trailer Hub
- Shop: Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Shop: Replacement Race for LM48548 Bearing
- Search Results: 8~222
- Search Results: 57352
- Search Results: 14011
- Search Results: 2021028188
- Search Results: 134543
- Search Results: channel coupler
- Search Results: x7910