Recommended Highest Capacity Safety Cable Extensions

Question

Question:

Are these cables rated at 8K per cable or per pair?

asked by: Randy

0

Expert Reply:

The Roadmaster 20" Safety Cable Extensions With Quick Links item # RM-910648-20 are rated at 8,000 lbs for the pair.

The highest capacity extensions we have are the 14,000 lbs Demco Safety Cable Extensions item # DM9523064 which are also rated per pair.

expert reply by: Jerred H

0

Answer 1

Hey Terry, thanks for all of the information! If your aftermarket bumper doesn't have special loops designed for safety chains, you should attach your safety cables directly to the Jeep’s frame rails. You will definitely want to use safety cables…

view full answer...

Answer 2

It most cases, it's recommended to go ahead and install a trickle charger on the vehicle's battery while using a supplemental braking system like the Demco SBS Stay-IN-Play DUO Supplemental Braking System part #SM99251. In most cases, there…

view full answer...

Answer 3

Hey Tim, thanks for reaching out, and good question. That Demco Vacuum Tee Fitting #DM6257 is actually made so you don’t have to cut into anything, but it only works if your Jeep has the right style connection at the brake booster. On the newer…

view full answer...

Answer 4

The Roadmaster #RM-035-1 D-ring adapters are indeed compatible with a Roadmaster Nighthawk tow bar. However, because you aren't using traditional base plates, you might have difficulty finding a good spot to attach the safety cables. In this…

view full answer...

Answer 5

Hey Gary, You'll just need some quick link/safety cable extensions. These can easily be added on while using the #RM23SR and then removed when not. We offer a few different lengths to choose from: 8" cables #RM-910648-8 10" cables…

view full answer...

Answer 6

Typically when using D-Ring adapters #BX88357 you'll have to snake some shorter cables, like #RM-910648-20 around the frame rail of the vehicle and then out to the front of the vehicle to connect to your safety cables. There's no easy…

view full answer...

Answer 7

When using D-ring adapters, like part #BX88357, to flat tow your Jeep you generally need to connect the safety cables to the Jeep's frame. One way to connect to the frame using cables like #RM-643 is to add extensions #RM-910648-20.

view full answer...

Answer 8

The Roadmaster Direct-Connect Base Plate Kit #RM-344-3B have a tab with a hole on the bracket portion of the baseplate that can be used to connect your safety cables. You will most likely need to use some quick links #RM-910022 since the hole is…

view full answer...

Answer 9

As long as the bumper you mention is rated by its manufacturer for towing, you won't need a base plate. The Roadmaster #RM-522 Falcon All-Terrain tow bar can be used on a D-ring bumper like the Rock Hard 4x4 Patriot Bumper if the proper adapter…

view full answer...

Answer 10

When using D-ring adapters to flat tow your Jeep like what it sounds like you're doing, safety cables will generally just need to be attached to the vehicle's frame. What you can do is use some short cables to wrap around each frame rail and…

view full answer...

Answer 11

I spoke with Demco and their technician stated the easiest way to install your Demco Air Force One Supplemental Braking System w/ Wireless Coachlink - Air Brakes - Proportional Item #DM26VR is to cut the 90 degree angle fitting attached to your…

view full answer...

Answer 12

You do not need an additional check valve to use the Demco Vacuum Connection Tee Fitting #DM6257. However, you will still need to use the check valves that came with your #SM99243 for installation.

view full answer...

Recommended Highest Capacity Safety Cable Extensions

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching