What is the Silicone Dust Boot Used for on Brake Calipers?
Updated 05/01/2023 | Published 04/28/2023 >
Question:
Recently bought a DeeMaxx Disc Brake Kit. Each caliper set came with a large rubber washerinch 1/8inch thick app. inside diameter 1 1/8inch and app. outside diameter 1 5/8. Please let me know what this washer is for and where it goes.
asked by: HC L
Expert Reply:
The Replacement Silicone Dust Boot w/ Metal Core for DeeMaxx Disc Brake Calipers # DE23FR is used to prevent the entrance of dirt and moisture which could cause corrosion and/or impair caliper operation.
To replace it you're going to need to slide the dust cover down to the bottom of the piston with the bottom flange hanging off just enough to start it in the groove cut in the caliper. Once that is in place, you'll slide the piston down into the caliper, and then the dust cover should slide right into place.
Product Page this Question was Asked From
Replacement Silicone Dust Boot w/ Metal Core for DeeMaxx 3,500-lb to 6,000-lb Disc Brakes
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Caliper Parts
- Dust Boot
- DeeMaxx
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Caliper Rebuild Kit for 6,000-lb to 8,000-lb Dexter Disc Brakes
- Shop: Demco Trailer Coupler - Adjustable Channel Mount - eZ-Latch - Black - 2" Ball - 10,000 lbs
- Search Results: solenoid
- Shop: Replacement Rubber Piston Seal for Kodiak Disc Brake Calipers - 3,500 lbs to 6,000 lbs
- Shop: Replacement Rubber Dust Boot for Kodiak Disc Brake Calipers - 9,000 lbs to 10,000 lbs
- Shop: Kodiak Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs
- Shop: Replacement Silicone Dust Boot w/ Metal Core for DeeMaxx 3,500-lb to 6,000-lb Disc Brakes
- Shop: Caliper Rebuild Kit for AL-KO/Hayes Disc Brakes - 10,000 lbs and 12,000 lbs
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Video: Review of Tie Down Spare Tire Mount - Frame Mount - TD38FR
- Video: A Closer Look at the EZ Connector Magnetic 7-Way Trailer Connector with 8' Long Cable
- Video: Review of Tie Down Spare Tire Mount - Spare Tire Mount with Removable Torsion Spindle-Hub - TD76FR
- Video: EZ Connector Magnetic 7-Way Trailer Connector with 4' Long Cable Spec Review
- Video: etrailer Enclosed Trailer Transition Plate Installation
- Search Results: led strip lights
- Q&A: Widest and Shortest Tire Size for 5,200 lb Axle with 6 Lug Bolt Pattern
- Video: Breaking Down the CE Smith Support Bracket for Tandem Axle Fenders
- Video: Review of DeeMaxx Replacement Silicone Disc Brake Caliper Dust Boot - DE23FR
- Q&A: What Lengths Are the CE Smith Support Bracket for Tandem Axle Fenders Offered In
- Q&A: Do Caliper Pins Need to be Lubricated When Installing Disc Brakes on a Trailer
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)

