Replacement Arm that Fits Thule Sidearm TH594XT

Question

Question:

Hi!! wanted to confirm if part number 753-3579 would fit my Thule 594XT sidearm rack. I see the part description refers to Thule T2 Hitch Bike Rack or Sidearm Roof-Mount Rack.

asked by: Jeison F

1

Helpful Expert Reply:

Yes, the replacement arm part # 753-3579 that you referenced is a confirmed fit for your Sidearm bike rack 594XT.

expert reply by: Jameson C

1

Answer 1

Most of the BMW factory roof racks are made by Thule, so their replacement keys will work on their mounting feet. There should be a number stamped right onto the lock core itself (or if you still have a key the number will be there as well). If you…

view full answer...

Answer 2

For your 2010 Subaru factory crossbar, you can upgrade your Sidearm Mounting hardware to fit that rear rail. The front rail should work with the current hardware, but the upgraded hardware should work with both bars if that is what you are…

view full answer...

Answer 3

Correct, most BMW roof racks are made by Thule so the Replacement Key for Thule Racks and Carriers part #THKEYN003 should work just fine.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Replacement Arm that Fits Thule Sidearm TH594XT

Product Page this Question was Asked From

Continue Researching